Wuxi Baitai Xinheng Instrument Co., LtdThe discharged water sample separated by the oil-water separator in the water oil detector enters the measurement chamber of the photoelectric sensor of the device. Measure the signals of transmitted and scattered infrared light generated by water samples, collect and process them through a microprocessor, measure the oil content in the water sample, and display it on a liquid crystal panel. If the oil concentration in the discharged water exceeds the set alarm point value (which can be set in the panel), the alarm indicator light will light up, and the corresponding relay will act after the set delay time to prevent the excessive concentration of water from being discharged outside the cabin.

Online oil detector in waterTechnical parameters

Range: BH-30 0.1-29.9ppm;

BH-100 0.1-99.9ppm；

BH-200 0.1-199.9ppm；

BH-500 0.1-499.9ppm；

BH-1000 0.1-999.9ppm；

Accuracy: Reading&# 177; 5% low-end with high precision;

Reproducibility:&# 60; Reading&# 177; 2%；

Response time: rapid response;

Storage time: 3 years (optional);

Record interval: 0-30 minutes can be set, default is 10 minutes (optional);

Display mode: LCD

Cleaning: Supports online manual or automatic scheduled cleaning (optional)

Sample flow rate: 0.1-2L/min in the low range to ensure that the lower the flow rate, the more ********;

Working temperature: 0-55 ° C;

Analog output: 4-20mA output

Relays: 4 SPDT, 230VAC, 5A;

Alarm: Two channel sound and light alarm, LCD screen prompt, relay output, adjustable alarm point and alarm time

Power supply: 100-230VAC, 50/60Hz, automatic selection; 20VA;

Inlet pipe: 1/4 "NPT internal thread, (external connection provided according to user requirements);

Drainage pipeline: 1/4 "NPT internal thread, (external connection provided according to user requirements);

Digital Communication: MODBUS/RS485, Communication speed and station address can be set (optional);

Standard method: ***** standard;

Size: 40 × 33 × 10cm