Product Introduction

Nabertherm L, Germany, LT 9/11/SKM muffle furnace, if there are corrosive substances in the working environment, we recommend using muffle furnace L 9/11/SKM. The kiln is equipped with a ceramic muffle furnace chamber embedded with heating elements, and heating is carried out from all four sides. Therefore, the kiln not only has a uniform temperature distribution, but also protects the heating elements from corrosive air erosion.

If there are corrosive substances in the work environment, we recommend using a muffle furnace L

9/11/SKM. The kiln is equipped with a ceramic muffle furnace chamber embedded with heating elements, and heating is carried out from all four sides. Therefore, the kiln not only has a uniform temperature distribution, but also protects the heating elements from corrosive air erosion. In addition, the smooth and dust-free muffle furnace chamber (with a furnace door made of fiber insulation material) can also ensure the smooth progress of ashing processing.
-Maximum temperature 1100 ° C
-Muffle furnace chamber is heated on all sides
-Ceramic muffle furnace liner effectively resists corrosive gases and vapors
-The furnace shell is composed of high-quality striped stainless steel plates
-The furnace door can be optionally equipped with a flip type furnace door (L) (for workpiece placement) or a lift type furnace door (LT) (to avoid contact with high-temperature surfaces) for free
-There is an adjustable air inlet on the furnace door
-There is an exhaust port on the back wall of the furnace
-Silent electronic relay

-For instructions on various controllers, please refer to "Measurement and Adjustment Techniques"
-Exhaust chimney, equipped with exhaust fan or catalyst
-Over temperature protection limiter, according to EN
60519-2 standard thermal protection level 2 adjusts the disconnect temperature to prevent kiln and workpiece overheating
-Protective gas interface, located on the back wall of the furnace