1Multi purpose vacuum oveneffect:

Multi purpose vacuum ovenWidely used in industries such as pharmaceuticals, chemicals, pharmaceuticals, food, light industry, plastics, etc. for low-temperature or high-temperature drying and baking, it has the advantages of fast drying speed, low pollution, and no damage to the internal quality of the dried goods.

IIMulti purpose vacuum ovenWorking principle and structural characteristics:

Multi purpose vacuum ovenDesigned with a flow-through drying rack, based on the principle of hot air rising, fully utilizing the heat conduction of each layer of drying rack tubes to accelerate the drying of materials. And it can make slight free swinging on the entire sealing surface to improve the sealing effect and achieve the vacuum degree inside the box, so that the materials can quickly vaporize and dry at a lower temperature environment.

Multi purpose vacuum ovenIt is to dry the materials that need to be dried under vacuum conditions. It uses a vacuum pump to extract air and moisture, creating a vacuum state in the working chamber, reducing the boiling point of water, and accelerating the drying process.

Multi purpose vacuum ovenThe material used for the inner arm is6mm304-2BStainless steel plate production, outsourced using1.5mm304-2BStainless steel plate production, internal seam welding is polished and polished to ensure a vacuum degree of-0.095MPaAccording to user needs, if the material contains corrosiveness, it can be used316Lmake.

There are two observation mirrors in front of the oven and two observation mirrors at the back for easy observation of changes in the internal materials.

The high-efficiency and energy-saving vacuum drying oven has a particularly significant drying efficiency for materials with high water content, especially for those with water content30-90%The material can shorten the drying time35-40%If the moisture content is40%The material needs to be dried using a conventional vacuum drying oven8-10Dry within hours, using an efficient and energy-saving vacuum drying oven only requires5-6The high-efficiency and energy-saving vacuum drying oven is heated with water at a temperature of65At ℃, on average, water is removed every hour4.8Kg of water, heated with steam at a temperature of100At ℃, on average, water is removed every hour6.5Kilogram of moisture.

The high-efficiency and energy-saving vacuum drying oven can choose different heating methods for different material temperature requirements. For materials that can withstand high temperatures, steam heating or electric heating can be used for fast drying speed. For materials that cannot withstand high temperatures, hot water heating is selected, with stable temperature control performance and no damage to the materials. Conventional vacuum drying ovens do not have this design.

The high-efficiency and energy-saving vacuum drying oven uses both steam and water heating (i.e. steam heating and hot water heating). It can solve the problem of using steam when there is a steam source in winter and using water for heating when there is no steam source in summer.

The vacuum suction port of the high-efficiency and energy-saving vacuum drying oven is set at the top of the inner box, which fully extracts the vaporized steam inside the box. Due to the vacuum suction tube being led to the bottom of the vacuum box in the interlayer and connected to the terminal of the condensate water drainage tank, the accumulated water in the condensate water drainage tank is drained. Conventional vacuum drying ovens do not have this design.

The heating and drying rack in the vacuum drying oven is movable, which can be quickly removed and cleaned of internal residues,

Efficient and energy-saving heating and drying racks are divided into8Layer, each layer's heat dissipation pipe is17Root, only between the heat pipes65mmThe gap greatly increases the heat dissipation area, and the evaporation area of each layer is1.29m2The cooling pipes between the conventional vacuum drying oven are100mmThe evaporation area is0.88m2）.

Installation of air inlet in high-efficiency and energy-saving vacuum drying oven1An airflow splitter is used to prevent direct contact between the airflow entering the oven and the material, and to quickly blow the condensed water on the inner wall of the oven to the condensate drainage channel. Achieve the desired goal.

3、 Multi purpose vacuumBakingboxwater injectionwashbottleIt belongs to a static state, which uses a vacuum pump to extract air from the box, keeping the working chamber in a vacuum state. When the vacuum reaches the specified vacuum degree, it immediately opensopenThe inlet valve puts water into the tank, and when the water reaches the designated position, the valve is closed. Each empty bottle in the tank automatically draws water into the bottle at the same time. After turning off the vacuum pump, the drainage valve is opened to drain the tankmanyremainAfter the water is discharged, start the vacuum pump to extract the water from the bottle. Turn off the vacuum pump and start heating30-50Open the box door in minutes and begin to dispense items. This vacuum bottle washing and drying solution solves the problem4mmThe following is the best and ideal equipment for the production of cosmetics and medical drugs using small water needles with small diameters that are difficult to inject into bottles. It meets the requirements of certified products.

electrical heating50-200℃ requires the installation of a condenser1The table requires valuable materials2Secondary recycling installation1Buffer tank, electric heating power12-14KW.

Inter layer distance:120mm(Center distance)

Operating temperature: room temperature+10~80℃ (water heating)

Power consumption:6-12KW

Operating temperature:50~120℃ (steam heating)

Steam pressure:0.2~0.6MPa

Steam consumption:20kg/h

Vacuum degree inside the box:-0.095MPa