Introduction:Quanyi Machinery specializes in producing motor bench T-slot cast iron platforms, motor bench test cast iron platforms, T-slot workbenches, and cast iron flat platforms. If you need them, you can directly call: 0317-8326986, or call: 18333443388. We are dedicated to serving you

Motor rackThe T-shaped slot cast iron platform is manufactured according to the GB/4986-85 standard, and the working surface uses grinding technology for grinding parts and repairing measuring tools. After grinding with this product, the surface roughness Ra of the parts is ≤ 0.08 μ m. The size and weight are generally small, with specifications ranging from 100 × 100-800 × 600, about 30-50 kilograms, mainly used as a cushion plate for molds. In order to reduce the production cost of the experimental platform and make the selling price of the experimental platform occupy the market in competition, 99.8% of the experimental platform manufacturing enterprises adopt the manual scraping process.

Motor rackAlthough manual scraping and grinding of T-shaped slot cast iron platform is relatively backward, it is an irreplaceable machining process for experimental platforms in situations where high precision is required. In order to improve the service life of the experimental platform and ensure its working accuracy, it is recommended to control the scraping depth above 0.02mm, which can ensure a longer service life and calibration cycle of the experimental platform.

Motor rackThe appearance of the T-shaped groove cast iron platform shows vibration patterns, increasing the surface roughness of the product, affecting accuracy and aesthetics. After the scraping and grinding process, the above problems rarely occur. Prevent small-scale local distortions on the working surface of the experimental platform to ensure the accuracy of its use. Check the micro quality of the working surface of the experimental platform, that is, the flatness of small peaks and valleys. High surface micro quality and good wear resistance are necessary to ensure the service life of the experimental platform

Motor rackMaintenance work of T-shaped slot cast iron platform:

1. Before use, use non corrosive gasoline to clean the anti rust oil on the working surface, and wipe it clean with degreased cotton yarn before use.

2. Temperature changes can cause measurement errors and should be used within the range of 20 ± 5 ℃.

3. Adjust the level to horizontal when using, so that the support points are evenly distributed on each support point.

4. Be careful when using and take precautions against collisions.

5. After use, wipe clean, apply anhydrous acidic anti rust oil, cover with moisture-proof paper, and store in a clean and dry place.

6. Weekly inspection period: The inspection cycle can be determined according to the specific situation of use, usually every 6 to 12 months.