VIP member
Microcomputer controlled electronic tensile testing machine
The microcomputer controlled electronic tensile testing machine is suitable for testing the tensile strength and elongation at break performance of ma
Product details
1WLW-20KNMicrocomputer controlled electronic tensile testing machineEquipment use: Suitable for testing the tensile strength and elongation at break performance of materials such as film, plastic, rubber, paper, fabric, synthetic fiber, leather, tape, wire, foil, and metal. It is computer-controlled, displays and prints data, curves, and reports.
IIMicrocomputer controlled electronic tensile testing machineFunctional features:
Software platform: VC programming is an independent installation software that can run on WINDOWS 98/2000/XP systems.
Force Expansion: One device can calibrate multiple sensors simultaneously, expanding the testing range.
Range mode: Full range without gear division, can support 0.2% -100% of sensor full load.
Curve selection: Multiple curves such as stress-strain, force elongation, force time, force strain, strength time, etc. can be selected.
Curve comparison: A set of experimental curves can be overlaid with multiple colors for comparison.
Local magnification: Any section of the test curve can be subjected to regional magnification analysis.
Data editing: The experimental data can be edited and modified flexibly.
Automatic storage: Test conditions and test results can be automatically stored.
Report format: The experimental report format is flexible and adaptable, suitable for different requirements of different users.
Effective selection: The validity of curve data in a set of experiments can be manually selected.
Automatic return: Moving the crossbeam can automatically return to the initial position of the test.
Manual control: The crossbeam can be manually controlled to move up and down.
3、 Technical parameters required:
Specification and model: WLW-20K
Measurement range (kN): 0-2 0-5 0-100 0-20 0-30 0-50 0-100KN
Force measurement resolution: 1/100000
Force measurement accuracy: ± 0.5%
Test speed (mm/min): 0.01-500
Speed accuracy: ± 0.5
Deformation accuracy: ± 0.5
Displacement accuracy: ± 0.5
Power supply: AC220V 400W
Product keywords:Pulling machine; Tensile testing machine; Testing machine; Material testing machine;
Related product links:
| Plastic ball indentation hardness tester | Microcomputer controlled electronic universal testing machine | Hot deformation Vicat temperature tester | Cantilever beam mechanical impact testing machine |
| Microcomputer controlled dart impact testing machine | fallBall impact tester | Drop hammer impact testing machine | Microcomputer controlled voltage breakdown tester |
| Hydraulic universal testing machine | Melt flow rate tester | Film processor | Notch prototype |
| Thin film impact testing machine | | Dart impact testing machine | Mechanical simply supported beam impact testing machine |
| Mechanical simple suspension combined impact testing machine | Microcomputer controlled electronic bending testing machine | Microcomputer controlled memory impact testing machine | Microcomputer controlled electronic universal testing machine |
| LCD simply supported beam impact testing machine | LCD simple suspensionimpact testing machine | microcomputerMobile phone compression testing machine | LCD simple suspensionimpact testing machine |
| | Microcomputer controlled drop hammer impact testing machine | Microcomputer controlled thin film impact testing machine | Universal prototype machine |
| Thermal deformation Vicat Martin heat resistance tester | Microcomputer controlled Martin heat resistance tester | Plastic ball indentation hardness tester | |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-