Shanghai Sanben Environmental Protection Technology Co., Ltd
Home>Products>MT-7000 residual chlorine detector residual chlorine analyzer total residual chlorine analyzer
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    15800931558
  • Address
    Room 202, Building 3, No. 38 Jianyun Road, Zhoupu Town, Pudong New Area, Shanghai
Contact Now
MT-7000 residual chlorine detector residual chlorine analyzer total residual chlorine analyzer
Brief description: ★ Large screen display, fully Chinese menu operation, human-machine dialogue, microcomputer operation ★ Display residual chlorine v
Product details
MT-7000Type online residual chlorine analyzerWidely used for continuous monitoring of residual chlorine and pH values in tap water, water treatment, pharmaceuticals, biochemistry, medical, chemical, and reverse osmosis.
MT-7000Type online residual chlorine analyzercharacteristic
★ Large screen display, fully Chinese menu operation, human-machine dialogue, microcomputer operation
★ Display residual chlorine value, pH value, temperature, time, and status on the same screen
★ Adopting technology, dual high impedance input impedance up to 1012 Ω, strong anti-interference ability
★ Software setting current output mode: The software selects 0-10mA or 4-20mA output
★ Waterproof and dustproof design, suitable for outdoor use
MT-7000Type online residual chlorine analyzerTechnical instructions
Measurement range
Residual chlorine: 0-20.00mg/L, resolution: 0.001mg/L
Hypochlorous acid: HOCL: 0-10.00mg/L, resolution: 0.001mg/L
PH value: 0-14.00pH, resolution: 0.01pH
Temperature: 0-60 ℃, Resolution: 0.1 ℃
Precision residual chlorine: ± 0.01mg/L
HOCL: ± 0.01mg/L
PH value: ±0.02pH ; Temperature: ± 0.5 ℃ (0-60.0 ℃)
Temperature 0-60.0 ℃, pressure 0.6MPa
Sensor (residual chlorine electrode) lifespan: ≥ 1 year
Response time:< 2min (90%,20℃)
Polarization time: ≥ 1h
Zui low flow rate: 15cm3/S (maintaining constant flow rate)
Stability: Drift<2% F · S per month at room temperature
Isolation output: 0-10mA or 4-20mA
Two sets of relay normally open contacts (for alarm or control purposes): 3A 240VAC, 6A 28VDC or 120VAC
Power supply: 220VAC ± 10%, 50 ± 1Hz
Power consumption: ≤ 1W
Dimensions: 96 × 96 × 130mm (height × width × depth)
Hole size: 92 × 92mm (height × width)
Standard configuration: One current output corresponds to residual chlorine, without PH function. If you need anything else, please specify when ordering.
Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!