Working principle and structure
The chain sand remover mainly uses the scraper on the rotating chain Scrape the sand that has settled at the bottom of the pool out of the pool and enter the collection hopper to complete the separation of sand and water, which can operate continuously It can also run intermittently, and the discharged sand is close to dry sand No further separation is required. The chain sand remover is mainly composed of a transmission device, a transmission bracket, a sand guide rod, a sand guide grid, a frame and guide rail, a chain and scraper, an idler wheel, a tensioning device, and a driven sprocket.

characteristic
1. Use a specially designed chain Reliable transmission.
2. Adopt waterproof bearings Long lifespan.
3. Reasonable structure Smooth operation.
4. Scrape the sand thoroughly efficient.

Ordering Instructions
The dimensions of L1 and L2 in the figure can be made according to the process circle provided by the user.
If it is necessary to expand the pool width or use sewage from other media Process parameters should be provided for ordering.
When the old pond is undergoing renovation Provide the original pool size.
When it is necessary to extend the hopper, it must be ordered separately Pre embedded part 1 is repeated at intervals of 1500mm.