1TCJ-25LCD simply supported beam impact testing machineEquipment usage:

LCD simply supported beam impact testing machineIt is a testing instrument used to test the impact resistance of non-metallic materials such as plastic, nylon, rubber, fiberglass, composite plastic pipes, and electrical insulation materials under dynamic loads. This machine adopts semi-automatic control, which is easy to operate and has high work efficiency. Automatically obtain test data after impacting the specimen. The superiority can be better demonstrated in laboratories and manufacturers that conduct continuous and extensive impact tests. The dedicated control panel and display screen equipped with this machine can meet the operation and display requirements required by users for testing, such as displaying impact absorption energy, impact strength, pendulum movement angle, and printing test reports.

IIMain technical indicators:

1. Impact energy: 0-25J

Host: simply supported beam:

Sample span: 40mm, 60mm, 70mm, 95mm

Sample width: 4mm-15mm

Sample thickness: 3mm-10mm

Pendulum impact velocity: V=3.8 m/s

Pre elevation angle: 150 °

Distance from the center of the pendulum axis to the center of the specimen: 380mm

3、 Configuration:

1. One host

2. One LCD controller

3. A simply supported beam pendulum (25J)

4. One printer

4、 Attachment

1. Positioning device (span positioning device, simply supported beam specimen positioning device)

2. One set of Allen wrench

3. Two supports and washers for the span of a simply supported beam

4. The host has four horizontal bases

5、 Important safety guidelines:

1. Before installing and operating this system, please carefully read all the following instructions and follow all precautions and operating methods.

2. Clean the entire machine with a dry cloth and cover it with a cloth to prevent dust.

3. Regularly apply a layer of rust proof oil on the hammer head, hammer seat, and their accessories according to the air temperature and humidity conditions.

4. This equipment should be placed in a dedicated laboratory and managed by a dedicated person.

6、 Precautions

1. This equipment should be placed in a dedicated laboratory and managed by a dedicated person.

2. Horizontal placement, use a level ruler to adjust the level during installation.

3. Install the span of the base bracket according to the manufacturer's sample size.

Attention: After replacing the pendulum and base, be sure to slowly lower the pendulum so that it passes through the center of the base before it can be used normally.

Product keywords: pendulum impact testing machine; Impact testing machine; Testing machine; Charpy Impact

Related product links: