Tilt angle transmitter KINAX N702 series

▶Product Introduction

KINAX N702 one-dimensional tilt transmitter

The tilt angle transmitter converts the tilt angle into a DC signal and is proportional to the tilt angle. The inclination value of the platform represents important measurement data, as a part of safety and the control system of this type of machinery.

▶Product Features

•Durable and sturdy magnetic resistance angle position transmitter that can rotate freely without stopping

•Equipped with an oil damping pendulum system

•The sensor has free contact and minimal wear on the swing

•The measurement range, rotation direction, and zero position can be directly programmed on the transmitter.

▶Technical Parameter

•Measurement principle: Magnetic reluctance angle position transmitter, free contact, free rotation

•Measurement range: 0... 360 °, freely programmable

•Measurement output: 4... 20mA with 3-wire connection

•Current consumption:< 80 mA

•Load resistance: maximum 600 Ω

•Accuracy: ± 0.2 °

•Resolution: 14 bits

•Instantaneous response: 25 ° tilt<1 second

•Electrical connection: connector M12x1,5-pole

•Swing rod damping: with silicone oil

•Installation location: Any

•Material: Shell: Aluminum coated

•Weight: Approximately 300g

▶environmental condition

•Temperature range: - 30 … +70 °C

•Humidity: Maximum relative humidity ≤ 90%, no condensation

•Shell protection: IP66 compliant with EN60529

•Vibration: IEC 60 068-2-6, 40 m/s 2 / 0 … 100 Hz

▶Pin configuration of connector M12