Humidifier Product Description:

When in use, simply connect the power and water source, and the humidifier will automatically start working. At the beginning, water will enter through the inlet valve. When the water level in the box reaches the working water level, the electric heating tube will start heating and continue to enter the water until a certain height is reached. When the water level in the box is below a certain height, it will automatically enter the water and continue to heat the electric heating tube. When the water level is below the working water level, the power supply of the electric heating tube will be automatically cut off to stop heating. When the water level exceeds, it will overflow through the overflow nozzle. The steam formed during the working process will be discharged through the
This series of humidifiers is designed to match various types of air conditioning units and can also be used in other occasions that require humidification. The humidification capacity ranges from 2kg to 40kg and can be matched with air conditioning units ranging from 10kw to 220kw in refrigeration. It can also be specially made according to user requirements. Welcome to choose!

Humidifier product performance:
——Power supply voltage: 220V/380V - △ (Y) -50Hz
——Working pressure: less than 0.6Mpa (inlet)
——Insulation resistance: greater than 5M
——Insulation strength: 2KV

Humidifier productsCharacteristics and working principle:
1. Reasonable structure: Unique design, stable performance, safe and reliable, made of stainless steel material, beautiful and lightweight, easy to install and use.
2. High thermal efficiency: The heating tubes are arranged reasonably and generate heat evenly; It can quickly heat and generate steam to meet the needs.
3. Safe and reliable: Equipped with a stainless steel low-level protection device, it can cut off the control circuit when the water level inside the box is too low, avoiding accidents caused by dry burning of the heating tube.
4. Excellent performance: High quality palace heating tubes ensure that the electrical performance of the product far exceeds national standards, ensuring excellent product performance and long service life.
5. Working principle: When in use, connect the power, water source, and drainage pipe, and the humidifier will start to receive water. When the water level in the box reaches the working water level, the electric heating tube will start heating up; When the water level is lower than the working water level, the control circuit can be cut off, thereby stopping the heating of the electric heating tube; When the water level is too high, it overflows from the overflow nozzle. The steam generated during the work process is discharged through the exhaust hole. Steam outlets can be divided into two types: open type and connected type.

Humidifier productsStructure and purpose:
The humidifier consists of a stainless steel heating box, an inlet tank, a water level control box, an electric heating tube, a junction box, etc.
This series of electric humidifiers is designed to match various types of air conditioning units, meeting the needs of different occasions and humidification levels; It can also be used as a separate humidification system after adding a humidity control box.

Usage, maintenance, and precautions:
1. Work pressure: not exceeding 1.1 times the rated value, and the casing should be effectively grounded.
2. Working medium: Clean circulating water that is not prone to scaling, corrosion, or impurities.
3. When installing the humidifier, it should be kept level and not tilted. When connecting the external water pipe, attention should be paid to the direction of the inlet valve not rotating.
4. The exhaust hole should not be covered during the work process to avoid affecting the discharge of steam.
5. Do not adjust or remove the float valve and control switch at will to avoid damage.
6. Regularly check the travel switch top rod inside the control box for any debris or rust, and ensure that the top rod can slide freely.
7. Regular inspection and cleaning should be carried out on the surface of the electric heating tube and the scale inside the box. At the same time, ensure that the connecting pipes between the water tank and the control box are unobstructed. When cleaning, simply open the cover plate of the box.
8. The power must be turned off during inspection and cleaning.
9. When not in use for a long time, the power and water sources should be turned off, and any remaining water in the box should be drained.