High precision solid density detector (electronic balance)
Product Introduction
Applicable to:Research laboratory for new materials such as powder metallurgy, hard alloys, metal materials, glass products, magnetic materials, raw material sintering, precision ceramics, etc
Principle: According to ASTMD297-93, D792-00, D618, D891, GB/T1033, JISK6530, ISO2781 standards. Using the Archimedes principle buoyancy method, accurately and directly read measurement values.

·This machine can also be used as a one in ten thousand electronic balance
·It has a solution compensation function and can be introduced with water, alcohol, silicone oil, mercury, etc
·Just two steps are needed to directly read the density value of the sample

function
1. The specific gravity meter has a built-in specialized program for measuring solid specific gravity.
2. Adopting a large water tank design to reduce the error caused by the buoyancy of the suspension line.
3. It can directly read the average weight in air, average weight in water, as well as the apparent density value, density value, volume, and percentage of mixed components of solid, granular, film, floating, and powder samples.
4. Temperature compensation setting and solution compensation setting provide more user-friendly operation and better meet the needs of on-site operations.
5. Equipped with RS-232C computer interface, it can easily connect PC and printer.

Specifications:

model	FBS–110E
Test type:	Solid, granular, thin film, floating body
Testing time:	About 5 seconds
Measurable range	0.0001g~120g
Density range:	Both ＞ 1 and ＜ 1 can be tested
Density analysis:	0.0001 g/cm3
set up:	Temperature compensation setting, solution compensation setting
Standard interface:	RS-232

Packing list: DX-120E host, measuring table, sink, 100g weight, power transformer, tweezers, instruction manual, certificate of conformity, calibration certificate.

Measurement steps:
① Place the sample on the measuring table, measure the weight in the air, and press the M key to memorize.
② Immerse the sample completely in mercury for 3 seconds to directly display the density value.