HCH bearing 68 series supply, 6800W7 series models, one-stop service at Anang Mall

fixedHCH bearingsThe method of loading

A、 fixedHCH bearingsThe ring on the load is exposed by the combined radial load of the local ring raceway, which circulates around the HCH bearing and is transmitted to the corresponding shaft or local area of the bearing. This load is called a fixed load. Its characteristic is the synthesis of radial load vectors and relatively fixed rings. The load-bearing capacity can be relatively loose.
B、 The rotational load acts on the various parts of the roller that rotate in the circumferential direction on the radial load of the synthetic ring of the HCH bearing, such as the rotational burden, which is borne by the characteristic of the synthetic radial rotation of the ring relative to the load vector. The tight fit of the rotating load ring should be selected in special circumstances, such as under light or heavy loads, where low-speed rings are only occasionally used. The ring bearing uses hard materials and has high surface roughness, and the rotating ring can also be looser to withstand loads.
C、 The synthetic radial load direction of the Huanchi HCH bearing swinging on the ring is unstable. If the load or load under load conditions is not directional, its characteristic is the role of the synthetic ring raceway swinging within a certain range in the radial load vector of the ring. The bearing load affects the contact area of the raceway in a certain area, or the load impact load and vibration load acting on the Huanchi bearing change frequently in direction and load value. To bear the load swing, the outer jacket ring and circumference,HCH bearingsThe hole should be tightly fitted.