Guta gum crusher | Low temperature material cold air crusher | Low melting point material crusher

Gu'an Machinery is specifically designed for materials that may adhere under high temperature conditions

For example, low-temperature ancient tower adhesive material Low temperature thermosensitive materials Low temperature wax materials, etc

The cold air temperature used in this model can be reduced to negative 5 degrees. According to the liquefaction point temperature of the material, its temperature can be adjusted during the crushing process, and the optimal crushing temperature can be selected to reduce energy consumption

Application scope

The Gu'an low-temperature crusher is suitable for various materials that cannot be crushed at room temperature, such as thermoplastic materials, hot melt adhesives, nylon, polyester, polypropylene, polyethylene, thermoplastic elastomers, etc TPU、 High density polyethylene (HDPE), polypropylene, thermosensitive adhesive PA1010、 Grinding of materials for industries such as low-density polyethylene (LDPE), clothing hot melt adhesive, decorative powder coatings, pharmaceuticals, and modified engineering plastics

Gu'an's low-temperature crusher is designed for the crushing of hot melt adhesive and easily viscous adhesive using a temperature control device. It controls the phenomenon of adhesive clumping and sticking to the blade during the crushing process due to weak temperature resistance.

In layman's terms, adding a temperature control device inside the low-temperature crusher keeps the temperature of the crushing chamber constant between 5-10 ℃, reduces the working temperature during crushing, and controls the temperature of thermosensitive materialsNon stick knife during the manufacturing and crushing processSmooth cutting and higher efficiency.

Characteristics of low-temperature crusher

The cutting tool adopts a shearing type to cut materials in one go.

The cooling method can be selected as water-cooled or air-cooled according to customer requirements.

Using the tool material created by Gu'an, the cutting is sharp and the wear resistance is strong.

For different elastomers, hot melt adhesives and soft rubber materials can be crushed to a minimum of 2mm.

Guta gum crushing equipment - low-temperature crusher - low-temperature material crusher

Hot adhesive soft rubber material crusher, anti adhesive rubber material crusher

This series of crushers is specifically designed and manufactured for a range of plastic and rubber materials that are not resistant to high temperatures, such as gum and hot melt elastomers

Its main feature is to crush the material into pellets in a low temperature environment of 5-20 degrees Celsius

The application of elastic materials in production and daily life is becoming increasingly widespread, due to their stability, temperature resistance, and sealing effect that general plastics cannot provide. However, the cost of elastic materials is also much higher than that of ordinary plastics

Guta rubber material is a non elastic material, rubber material The problems they encounter during crushing are:

1. Elastic materials have low hardness and soft physical properties, and cannot be crushed by impact or compression like brittle materials such as ABS

2. Hot melt materials have poor temperature resistance. Most materials will exhibit a molten state in environments above 70 degrees Celsius, and some materials (such as high-purity PP) may even begin to melt and adhere to each other at around 30 degrees Celsius

3. After high-frequency friction, most elastomers generate static electricity, which causes the material to be crushed into particles and the material to be discharged smoothly

Based on the above characteristics of thermosensitive materials, the Gu'an low-temperature crusher has been designed and improved to achieve the following functions:

1. Two different types of steel materials are used for cutting tools: high hardness high-speed steel is used for the cutting edge, which greatly improves the cutting and crushing ability of the cutting edge (with higher hardness than SKD-11 material) Complete the cutting in one go without any edge banding At the same time as high cutting, it eliminates multiple cutting and friction caused by inadequate cutting in one go

2. The blade body is made of steel with low hardness, which enhances its toughness and greatly improves the impact resistance of the tool, ensuring the crushing force of large materials

3. The crushing chamber adopts a low-temperature design, allowing materials to be crushed in a low temperature environment of 5-20 degrees Celsius, avoiding adhesion caused by material melting due to temperature rise,The sieve is specially treated to reduce the impact of static electricity on material falling and ensure smooth discharge

Parameters of low-temperature crusher