4-16, Building 5, Baimenqian Industrial Zone, No. 215 Busha Road, Buji Street Office, Longgang District, Shenzhen City, Guangdong Province

Gravity based hydraulic automation water treatment machine

National Patent Number: eight

(1) The daily operating cost of a water treatment system is one-third to one-fifth of that of a conventional sand tank system.
(2) The equipment performance is safe and reliable, integrating physical, biological, and chemical methods. No secondary pollution.
(3) Hydraulic automation equipment does not require operation or maintenance, has simple management, and does not have dedicated personnel.
(4) The unique dual aeration and oxygenation technology activates the water with oxygen, effectively preventing black and odorous water and removing organic pollution from the water.
(5) 7-layer fine mineral filter layer, with clear and transparent effluent, superior to relevant national standards.
(6) The device has a compact structure and occupies a small area.
(7) No need to replace filter media or lining. UPVC water supply material, non corrosive, main equipment warranty of 30 years.
(8) Hydraulic automatic backwashing, automatic stop, no manual operation required. Rinse for 3 minutes.
(9) National patents, high-tech products leading the international level, with comprehensive advantages.

Small river water purification, landscaping, and water quality maintenance
(Natural rivers, landscape rivers, artificial rivers, landscape creeks, landscape waterfalls, etc.)
Small lakes for water purification, landscaping, and water quality maintenance
(Natural lakes, scenic water areas, park lakes, artificial lakes, water storage tanks, ponds, etc.)
Landscape water bodies and fountain water bodies within large hydrophilic communities
(Landscape water circulation, water quality freshness, closeness to nature, elimination of water pollution)
Purification of precious fish watching water bodies and artificial aquaculture pond water
(Aeration and oxygenation to increase aquaculture density and improve the living environment of aquatic organisms)

1、 Aeration dissolved oxygen eliminates black and odorous phenomena in water bodies
The water enters the water treatment equipment through a circulating pump for sufficient aeration and dissolved oxygen. Through the mixing of gas and water, the coagulation effect of pollutants in the pool water can be enhanced, which is beneficial for the effective interception of pollutants by the next step of the filtration medium. Water bodies need to undergo two rounds of aeration in a single water treatment project. Increasing the dissolved oxygen content in water can effectively prevent the phenomenon of black and odorous water. Because with the proliferation of algae, a large amount of oxygen is consumed in the water, causing aerobic bacteria to die and anaerobic bacteria to multiply, the black and odorous phenomenon is the result of fermentation. According to water quality testing, the dissolved oxygen in the treated water remains saturated, making the water always fresh and activated.

2、 Fine filtration to reduce turbidity
During the filtration process, the main functions are interception and adsorption. The equipment uses multiple layers of composite anti filtration layers composed of different mineral materials from large to small, greatly enhancing the interception and filtration effect. At the same time, a thin biofilm is formed on the surface of the filtration medium, which can further adsorb organic and inorganic substances in the water. The minimum particle diameter of the filter medium is 0.15 millimeters, with extremely strong interception ability and excellent effluent quality.

3、 Nitrogen and phosphorus removal function
The increase of nitrogen and phosphorus in water bodies enables algae and other organisms to obtain abundant nutrients and reproduce in large quantities, resulting in eutrophication of the water body. Foam is produced in water body by mixing air and water, and foam is composed of organic matter such as nitrogen, phosphorus and grease. In the water treatment equipment, when the raw water mixed with foam comes to the filter layer, the foam floats on the water surface and cannot pass through the filter layer. When foam accumulates, it overflows through the pipeline, or when backwashing, foam is washed away with one piece. Thus, continuous cyclic treatment is carried out to gradually remove nitrogen, phosphorus, and other elements that cause eutrophication in the water.

4、 Fully automated operation and backwashing
Backwashing is entirely determined by the working condition of the filter layer in the filter, rather than the unscientific practice of regular backwashing in traditional processes. Due to the continuous interception of suspended solids in the incoming water by the filter layer, the filter layer becomes clogged and the water level rises, resulting in siphon phenomenon. At this time, the filter layer undergoes strong backwashing. After the filter layer is washed clean, the backwash is completed. During flushing, it does not affect the operation of the equipment. The entire system does not require dedicated personnel to manage, part-time work is sufficient. Simply press the water pump start button to start the system, and turn off the system by disconnecting the water pump button.

5、 Advanced algae killing and sterilization system
Algae in water reproduce rapidly under photosynthesis. The proliferation and death of algae cause black and odorous water bodies. Continuous algae removal is required, which has been treatedAlgae can be removed from water bodies, but they will reproduce in large numbers afterwards.
Advanced configurationUltraviolet Water Purifier

Total water volume (m3)/cycle period (h)=hourly processing water volume (m3/h), then refer to the table to determine the model and obtain the dimensions of each part of the model.

Water volume table for hydraulic automation equipment processing

model	Water treatment capacity （m3 /h）	Total pool capacity of swimming pool, recreational pool, and water park (m3)				Total storage capacity of lake water and landscape water (m3)
		Cycle period				Cycle period
		6h	8h	10h	12h	48h	72h
SW-1300	18~25	100~150	150~200	180~250	200~300	800~1200	1200~1800
SW-1700	40~56	240~330	320~440	400~560	480~670	1900~2600	2800~4000
SW-2200	70~100	420~600	560~800	700~1000	800~1200	3300~4800	5000~7200
SW-2600	110~160	660~960	880~1200	1100~1600	1300~1900	5200~7600	7900~11500
SW-3000	160~230	960~1300	1280~1800	1600~2300	1900~2700	7600~11000	11500~16500
SW-3400	220~300	1300~1800	1700~2400	2200~3000	2600~3600	10000~14400	15800~21600
SW-4000	280~400	1600~2400	2200~3200	2800~4000	3300~4800	13400~19000	20000~28800
SW-4400	360~510	2000~3000	2800~4000	3600~5100	4300~6000	17000~24000	25900~36700
SW-4800	440~630	2600~3700	3500~5000	4400~6300	5200~7500	21000~30000	31600~45000
SW-5400	540~760	3000~4500	4300~6000	5400~7600	6400~9000	25000~36000	38000~54000
SW-5800	640~900	3800~5400	5000~7200	6400~9000	7600~10000	30000~43000	46000~64000
SW-6200	740~1000	4400~6000	5900~8000	7400~10000	8800~12000	35000~48000	53000~72000
SW-6500	860~1200	5000~7200	6800~9600	8600~12000	10000~14000	41000~57000	60000~86000
SW-7000	1000~1400	6000~8400	8000~11000	10000~14000	12000~16800	48000~67000	72000~100000
SW-7400	1140~1600	6800~9600	9000~12800	11400~16000	13000~19000	54000~76000	82000~115000

explain:
1. The circulation cycle of the swimming pool is determined according to the requirements of Party A and the level (importance) of the pool. It is predicted that for pools with high pedestrian flow in the future, the circulation cycle should be shortened and the lower limit of the water treatment capacity should be taken. Conversely, the cycle can be extended and the upper limit of the water treatment capacity should be taken.
2. The treatment of lake water requires a high water quality and a clear cycle of no more than 24 hours. For visibility requirements of 1.2-1.5m, take 24-48h; for visibility requirements of 0.5-0.8m, take 48-72h. After 72h, the water quality cannot be guaranteed.

Model and Size Table of Hydraulic Automation Water Treatment Machine

model	Processing water volume m3/h	Equipment size mm	Height mm	Inlet pipe diameter mm	Diameter of outlet pipe mm	Diameter of sewage pipe mm	Net height of computer room mm
SW-1300	18~25	1300×1300	3400	75~100	75~100	150	4500
SW-1700	40~56	1700×1700	3400	100~150	100~150	200	4500
SW-2200	70~100	2200×2200	4000	150~200	150~200	200	4500
SW-2600	110~160	2600×2600	4400	200~250	200~250	250	5000
SW-3000	160~230	3000×3000	4400	200~250	200~250	300	5000
SW-3400	220~300	3400×3400	4400	200~300	200~300	300	5000
SW-4000	280~400	4000×4000	4400	250~350	250~350	400	5000
SW-4400	360~510	4400×4400	4400	250~400	250~400	400	5000
SW-4800	440~630	4800×4800	4700	300~500	300~500	500	＞5000
SW-5400	540~760	5400×5400	4700	350~500	350~500	500	＞5000
SW-5800	640~900	5800×5800	4700	400~500	400~500	600	＞5000
SW-6200	740~1000	6200×6200	4700	400~600	400~600	600	＞5000
SW-6500	860~1200	6500×6500	4700	400~600	400~600	700	＞5000
SW-7000	1000~1400	7000×7000	4700	400~600	400~600	700	＞5000
SW-7400	1140~1600	7400×7400	4700	400~700	400~700	800	＞5000
SW-800(I)	20~40	Φ800	1500	75~100	75~100	150	1800
SW-1000(I)	20~40	1000×1000	2200	100~150	100~150	150	2500
SW-1200(I)	40~70	1200×1200	2700	150~200	150~200	200	3000
SW-1400(I)	70~100	1400×1400	2700	200~250	200~250	200	3000
SW-1600(I)	100~130	1600×1600	2700	250~300	250~300	250	3000

Note:The inlet pipe, return pipe and other pipelines can be connected freely within 360 ° of the plane, while the discharge pipe can only be connected within 360 ° of the bottom of the equipment. It is best to drain vertically downwards from the center of the machine.