Product Introduction
The Nabertherm L5/13-LT15/13 muffle furnace in Germany requires extremely short heating time due to the heating element being installed on the support tube and freely radiating heat in the furnace. In addition, the sturdy insulation structure is composed of lightweight refractory bricks, ensuring a maximum operating temperature of 1300 ° C for the equipment.
Due to the heating element being installed on the support tube and able to freely radiate heat in the furnace, the heating time required for this type of kiln is extremely short. In addition, the sturdy insulation structure is composed of lightweight refractory bricks, ensuring a maximum operating temperature of 1300 ° C for the equipment. If it is necessary to shorten the heating time or increase the working temperature, this type of kiln can replace the commonly used L (T) 3/11 furnace type.
-Maximum temperature 1300 ° C
-Double sided heating through heating elements
-The heating element installed on the support tube radiates heat freely and has a long service life
-The furnace chamber has a sturdy multi-layer lightweight refractory brick insulation structure
-The furnace shell is composed of high-quality striped stainless steel plates
-The double-layer furnace shell structure is stable and reduces the temperature of the shell
-The furnace door can be equipped with a flip type furnace door (L) (which can be used for workpiece placement) or a lift type furnace door (LT) (which can avoid high temperature surface contact)
-There is an adjustable air inlet on the furnace door
-There is an exhaust port on the back wall of the furnace
-Silent electronic relay
-For instructions on various controllers, please refer to "Measurement and Adjustment Techniques"
-Exhaust chimney, equipped with exhaust fan or catalyst
-Over temperature protection limiter, according to EN 60519-2 standard thermal protection level 2, adjusts the disconnection temperature to prevent the kiln and workpiece from overheating
-Protective gas interface, located on the back wall of the furnace
-Manual or automatic gas distribution system
-For other accessories, please refer to "Muffle Furnace Accessories"
model |
highest |
inside dimensionmm |
Volume increase |
Outer Dimensionsmm |
Connection power |
Electrical connection* |
weight |
minute |
||||
wide |
deep |
tall |
wide |
deep |
tall |
|||||||
L 5/13 |
1300 |
200 |
170 |
130 |
5 |
440 |
470 |
520 |
2,4 |
1each other |
42 |
45 |
L 9/13 |
1300 |
230 |
240 |
170 |
9 |
480 |
550 |
570 |
3,0 |
1each other |
60 |
50 |
L 15/13 |
1300 |
230 |
340 |
170 |
15 |
480 |
650 |
570 |
3,6 |
1each other |
70 |
60 |
|
||||||||||||
model |
highest |
inside dimensionmm |
Volume increase |
Outer Dimensionsmm |
Connection power |
Electrical connection* |
weight |
minute |
||||
wide |
deep |
tall |
wide |
deep |
tall |
|||||||
LT 5/13 |
1300 |
200 |
170 |
130 |
5 |
440 |
470 |
520+220 |
2,4 |
1each other |
42 |
45 |
LT 9/13 |
1300 |
230 |
240 |
170 |
9 |
480 |
550 |
570+290 |
3,0 |
1each other |
60 |
50 |
LT 15/13 |
1300 |
230 |
340 |
170 |
15 |
480 |
650 |
570+290 |
3,6 |
1each other |
70 |
60 |