VIP member
German Nabore K1/10-K4/13KC melting furnace
The Nabertherm K1/10-K4/13KC melting furnace from Germany is a compact melting furnace that can be used for melting non-ferrous metals and special all
Product details
Product Introduction
The Nabertherm K1/10-K4/13KC melting furnace from Germany is a compact melting furnace that can be used for melting non-ferrous metals and special alloys. Its unique structure has multiple technical advantages. Desktop structure is suitable for various laboratory applications. The practical tilt assist device (with shock absorbers) and the casting groove on the front of the furnace make the pouring of metal melt extremely convenient and the measurement accurate.
This compact melting furnace can be used for melting non-ferrous metals and special alloys, and its unique structure has multiple technical advantages. Desktop structure is suitable for various laboratory applications. The practical tilt assist device (with shock absorbers) and the casting groove on the front of the furnace make the pouring of metal melt extremely convenient and the measurement accurate. The maximum temperature of the kiln is 1000
° C, 1300 ° C, and 1500 ° C. Melting temperature is relatively low 80-110
° C.
-The maximum temperature is 1000 ° C, 1300 ° C, or 1500 ° C
° C, melting temperature is around 80-110 ° C lower
-Crucible capacity 1, 2 or 4 liters
-The supply scope includes long mouthed graphite crucibles
-Install casting troughs on the furnace (excluding KC series furnace types) to ensure precise quantification during casting
-Compact desktop design with pressure spring tilt mechanism for easy crucible emptying
-The top of the crucible is insulated with a flip type furnace cover, and the top cover is opened during casting
-For instructions on various controllers, please refer to "Measurement and Control Technology"
|
-Other types of crucibles, such as those made of steel or SiC |
-The over temperature protection monitor adjusts the disconnect temperature according to EN 60519-2 standard thermal protection level 2 to prevent overheating of the furnace and molten metal. The kiln is closed when the temperature is too high and reconnected when it is below the critical temperature. |
-Visual hole for observing molten metal |
model |
maximum temperaturecrucible |
volume |
Outer Dimensions |
mm |
||
|
Connection powerelectrical |
weight |
° |
C |
rise |
wide |
deep* |
tall |
||
|
kW |
1000 |
connect |
1 |
520 |
680 |
660 |
3 |
1kilogram |
85 |
|
K 1/10 |
1000 |
A6 |
2 |
520 |
680 |
660 |
3 |
1each other |
90 |
|
K 2/10 |
1000 |
A10 |
4 |
570 |
755 |
705 |
3.6 |
1each other |
110 |
|
K 4/10 |
1300 |
A25 |
1 |
520 |
680 |
660 |
3 |
1each other |
120 |
|
K 1/132 |
1300 |
A6 |
2 |
520 |
680 |
660 |
3 |
1each other |
125 |
|
K 2/132 |
1300 |
A10 |
4 |
570 |
755 |
705 |
5.5 |
3each other1 |
170 |
|
K 4/132 |
1500 |
A25 |
1 |
580 |
630 |
580 |
10.5 |
3each other |
170 |
|
KC 1/153 |
1500 |
A6 |
2 |
580 |
630 |
580 |
10.5 |
3each other |
170 |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-