VIP member
GF series dry rolling granulator
Introduction to GF series dry rolling granulator: Powdered materials are quantitatively fed into the main material hopper of the rolling plate through
Product details
working principle:
Powdered materials are quantitatively fed into the main hopper of the rolling plate through a vibrating feeding hopper and a transverse spiral feeding hopper, and uniformly added to the main hopper of the rolling plate to maintain a constant amount of material particles. Then, the longitudinal conical spiral in the main hopper of the rolling plate precompresses the powder and transports it to the arc-shaped grooves of two pressure rollers. The surfaces of the two pressure rollers are evenly distributed with semi flat circular arc-shaped grooves or diamond shaped grooves of the same shape. Through the meshing transmission of a pair of gears, the two pressure rollers rotate at the same speed and in the opposite direction. The material conveyed to the groove by the conical spiral is bitten into the groove and compressed instantly. After compression, the material gradually decreases with the pressure under the action of its elasticity and gravity, falls off from the groove and enters the crushing and granulation system according to the user's particle size. Require sieving and grading to obtain uniform granular products that meet quality requirements, and the undersized powder should be returned to the vibrating hopper for recycling.
characteristic:
No additives are required, the dry powder is directly granulated.
The particle strength can be adjusted, and the strength of the finished product can be controlled by adjusting the pressure of the pressure roller.
● Loop operation to achieve continuous production.
High finished product output, with a single machine output of over 2000kg/h (bulk density of 1.5 × 103kg/m3)
Application:
Petrochemical, biotechnology, metal powder, fine chemical, pharmaceutical, food, pesticide, fertilizer, mineral, coal
Technical parameters:
modelproject |
GF-1 |
GF-2 |
GF-3 |
GF-4 |
GF-5 |
Roll diametermm |
φ240 |
φ240 |
φ300 |
φ360 |
φ480 |
Effective usage width of rolling millmm |
80 |
160 |
250 |
360 |
480 |
Roll speedrpm |
8-20 |
8-20 |
8-20 |
8-20 |
8-20 |
Z large forming pressure t |
50 |
60 |
80 |
100 |
130 |
rollerZ thickness mm |
4 |
5 |
6 |
8 |
8 |
Rolling outputkg/h |
250-500 |
500-900 |
700-2000 |
1000-1400 |
2000-7400 |
Finished product granularitymm |
0.2-5 |
0.2-5 |
0.2-8 |
0.2-8 |
0.2-8 |
Finished product outputkg/h |
80-150 |
150-300 |
300-600 |
600-1000 |
1000-2000 |
Host powerkw |
7.5 |
11 |
15 |
22 |
30 |
total powerkw |
13 |
21 |
30 |
46 |
60 |
External dimensionsLength x Width x Height mm |
1500×2000×3800 |
1700×2000×4000 |
2000×2500×4200 |
2500×2500×5200 |
2800×2600×6000 |
weightt |
7 |
8 |
10 |
14 |
20 |
|
Note: 1. Rolling production is based on a sheet density of 1500kg/m3Calculate the roll speed at 20rpm. 2. The finished product output is calculated based on 50% of the established quantity. 3The particle size of the finished product can be adjusted within a large range by changing the aperture of the sieve plate of the crusher. 4The actual power used by the host is equal to the selected motor power70%. 5The speed of the rolling mill is adjusted by changing the belt pulley transmission between the motor and the reducer. | |||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-