Introduction:Flexible Welding Platform, 3D Flexible Welding Platform, Flexible Welding Fixtures, Welding Flexible Fixtures - Hebei Quanyi has launched a new product, the 3D Flexible Welding Platform. Our manufacturer has chosen a relatively core technical team in both design and production to create more exquisite products.

The 3D flexible welding platform is currently a key focus of development in China and one of the standard lines for measuring the level of China's casting industry. The 3D flexible welding platform is a process of melting metal into a liquid that meets certain requirements and pouring it into a mold. After cooling, solidification, and cleaning treatment, it obtains castings with predetermined shapes, sizes, and properties. The manufacturing of 3D flexible welding platforms has different characteristics from other processes, mainly adaptability, required materials and equipment, and environmental pollution.

Flexible Welding Platform Description:

1. The selection of tooling platforms depends on the size and shape of the product, and D16 series platforms are commonly used for sheet metal and small steel structural components;

2. The D28 series platform is commonly used in large steel structures and heavy machinery industries. For situations where the size of workpieces varies greatly, it is recommended to use the D22 series;

3. The selection of accessories should be based on the shape, size, and complexity of the workpiece;

4. When the platform cannot meet the size of the workpiece, U-shaped square boxes, L-shaped square boxes, supporting angle irons and other supporting components can be used for expansion and extension.

Characteristics of flexible welding platform:

1. The three-dimensional flexible welding platform has five working faces, with the side used for expansion or auxiliary positioning;

2. Divided into three series: D16/D22/D28;

3 The holes in the D16 series are Φ 16, with a spacing of 50mm ± 0.05 between them, and are arranged in an array with 50x50mm grid lines distributed on the surface;

4. The D22 series consists of holes with a diameter of Φ 22 and a spacing of 75mm ± 0.05 in an array, with 75x75mm grid lines distributed on the surface;

5 The holes in the D28 series are Φ 28, with a spacing of 100mm ± 0.05 between them, and are arranged in an array with 100x100mm grid lines distributed on the surface.