The working process of acid mist purification tower:
The acid mist purification tower separates pollutants from the gas and converts them into harmless substances to achieve the purpose of purifying the gas. The acid mist waste gas in the industrial production process is collected by a hood, and then enters the inlet section of the alkali washing tower through a pipeline. It undergoes a neutralization reaction vertically upward with the absorption liquid from the top to the bottom of the spray section, reducing the concentration of the waste gas. Then it continues to enter the packing section, where the waste gas rolls around the plastic ball and neutralizes with the absorption liquid, further reducing the concentration of the waste gas before entering the dehydrator section to remove liquid droplets. The purified gas is discharged into the atmosphere. After testing and analysis, the purification rate of sulfuric acid mist can reach 93%, nitric acid mist can reach 90%, and hydrochloric acid mist can reach 98%. The technical indicators for acid mist purification performance meet environmental protection requirements.

Advantages of acid mist purification tower:
Fiberglass acid mist purification tower is a commonly used purification equipment in waste gas treatment engineering. This purification tower has two types of multifunctional acid mist exhaust gas purification tower products, "vertical" and "horizontal", mainly used for exhaust gas purification equipment made of fiberglass. It has the characteristics of reasonable product design, new high-tech packing, low resistance loss, large specific surface area, complete chemical reaction, reasonable gas-liquid ratio selection, high absorption and purification efficiency, good aging resistance, and easy installation and maintenance.

Scope of application of acid mist purification tower:
Fiberglass acid mist purification tower is widely used for purifying toxic and harmful gases such as NOX, SO2, H2SO4, HCl, HF, SIF4, CO2 generated in mechanical processing industries such as chemical, electroplating, hardware, electrical, pharmaceutical, printing and dyeing, telecommunications, and clocks; It can also be applied to the deodorization treatment of odorous substances such as ammonia, hydrogen sulfide, phenol phosgene, formaldehyde, methanol, amines, etc; The filtration area depends on the processing capacity, and the neutralization and removal effect is 95%; Discharge outlet<10PPM. Fans and pumps can be flexibly designed and arranged according to the user's site, with convenient maintenance, compact structure, and small footprint.

Characteristics of the main body of the acid mist purification tower:
1. Composite fiberglass storage tank and filling pipe, with a filtrate device added to the suction pipe, and the inlet section made of composite fiberglass.
2. Both the first and second spray sections use a row of Y-1 nylon nozzles, multi-faceted hollow ball filter materials, and organic glass inspection holes.
3. The effective water blocking section is equipped with a swirl plate to enhance the water blocking effect.
4. Fiberglass hood cover.
5. Fiberglass centrifugal fan.
6. Plastic water pump or stainless steel centrifugal pump.
1. When installing the acid mist purification tower, users need to build a concrete foundation at a height of more than 150mm above the ground, and the water pump and fan should have separate concrete foundations as required.
2. Attention should be paid to the protection of the product during transportation and installation, and the body and components should not be damaged.
3. When the purification tower leaves the factory, we will use segmented packaging and transportation according to the specific situation, and have Tianqing Environmental Protection's technical personnel install and debug it on site.
4. If the acid mist purification tower is to be used outdoors, anti freezing measures should be taken at the bottom water pool of the tower body in winter.
5. There is a liquid level mark on the bottom pool of this device. Before use, be sure to inject the absorption solution according to the liquid level mark. Attention should be paid to replenishing absorbent solution during use.
6. When using, the purification tower should first turn on the circulating water pump for 2-3 minutes before starting the blower. When stopping, the blower should be stopped for 1-2 minutes before stopping the circulating water pump.
7. The acidity depth of the liquid in the bottom water tank of the tower and the degree of gas purification at the exhaust port should be checked regularly according to the usage situation. If it exceeds the standard. The absorbent in the bottom pool should be replaced.
8. Please note that the user service will conduct a maintenance on the acid mist purification tower after one and a half to two years of use, checking the filling of the disc-shaped spray pipes and fillers, and cleaning them.