FJX evaporative circulation pump is a high flow, low head axial flow pump. FJX evaporation circulation pump is manufactured according to international standards, which is efficient, energy-saving, and easy to maintain. It is suitable for evaporation, concentration, and cooling in industries such as diaphragm caustic soda, phosphoric acid, sugar, molten salt, papermaking, and wastewater. To improve equipment production capacity and increase the heat transfer coefficient of the heat exchanger, it is used for forced circulation.

Installation position: Ground foundation (elastic support can be configured according to user needs) directly suspended on the evaporator.

Pump form: vertical, horizontal.

Transmission methods: direct drive, belt drive, hydraulic coupling, universal joint drive.

Sealing structure: combination mechanical seal, packing seal.

Pump body manufacturing methods: casting, welding.

Performance range

Flow rate: 300-23000m³/h

Lift: 2-12M

Work pressure: 0.1-0.7MPa G

Working temperature:- 20℃-480℃

Product Features

Our company has introduced and absorbed the advantages of similar products at home and abroad, and made significant adjustments to the product structure to ensure the reliability, economy, and safety of pump operation. Mainly manifested in:

1. The speed is low, generally within 980r/min, which meets the requirements of the crystallization process and runs smoothly.

2. Excellent hydraulic performance, efficiency>70%, wide high-efficiency zone, and good anti cavitation performance.

3. Consider the flow direction of the pump medium to be vertically downward and horizontally outward. The significant impact of water flow force on the pump shaft requires the installation of a pump shaft sleeve protective device inside the pump body. By transferring the diving force of the medium to the pump body, the stable operation of the pump is ensured, greatly reducing the impact of the medium on the mechanical seal force and extending the service life of the mechanical seal. The improvement of this structure has taken a significant step forward among similar products in China. In addition, the pump body adopts integral casting with good rigidity, and the intermediate support structure is stably connected.

4. The bearing box is a square large-span heavy-duty structure with good stability, strong load-bearing capacity, and reliable operation. Compared with similar domestic products, it is easy and accurate to install (the original domestic bearing box was a split type). Radial short cylindrical bearings and heavy-duty paired bearings are used at the front and rear ends respectively. All of its bearings are made of NSK (SKF) or high-quality domestic bearings.

5. The shaft seal adopts a combination of auxiliary impeller power seal and Bergman quick installation double end mechanical seal, with external cooling flushing water to improve the working conditions of the shaft seal and prolong the service life of the mechanical seal. The outer circle of the shaft sleeve is enlarged, and compared with similar domestic products, the wall thickness is thickened and the deformation is small.

performance parameter

model	Traffic Q （m3/h）	Head H （m）	Power (KW)		Efficiency (%)	rotational speed （r/min）
			shaft power	Motor Power
FJX-250	300	2.5	3.4	7.5	60	980
FJX-300	520	3	6.8	11	62	980
FJX-350	1350	4	29.6	37	65	980
FJX-450	2200	4	46.8	55	68	980
FJX-500	2650	4	42	75	70	740
FJX-550	4000	4	62.8	110	70	750
FJX-700	4772	3.3	56.7		75.6	370
	5320	3.4	64.7		76.1	400
	5700	3.5	70.7		76.9	430
	6154	3.6	78.8		76.6	460
	6579	3.6	85.8		75.2	490
FJX-800	6142	3.8	84.3		75.4	500
	6790	3.8	86.7		76.8
	7400	3.7	96.6		77.2
	7815	3.7	102.7		76.7
	8417	3.8	115.7		75.5
FJX-900	7748	3.4	94.3		76.1	424
	8407	3.4	100.6		77.4
	9000	3.5	110		78
	9656	3.5	119.1		77.3
	10280	3.6	130.2		77.4
FJX-1000	9210	3.4	111.8		76.3	380
	1078	3.5	132.6		77.5
	11000	3.5	134.4		78
	11970	3.6	151.1		77.3
	12700	3.6	162.8		76.5