Gongyi Baolai Water Treatment Waste Gas Adsorption Activated Carbon uses high-quality wood, coconut shells, or anthracite coal. Through a unique pore size adjustment process of deep activation, the activated carbon has abundant pores, and the pore size is slightly larger than that of toxic gases, with a specific surface area greater than 1300 square meters per gram. It has high adsorption capacity for toxic and harmful gases such as benzene, formaldehyde, and ammonia, and can effectively remove gaseous pollutants and harmful odor substances in indoor air, thereby achieving the goal of reducing pollution and purifying the air.

Activated carbon for air purification is available in two specifications: spherical and cylindrical, according to different application scenarios. Therefore, it is easy to desorb and regenerate, with minimal loss. Compared to traditional granular or powdered activated carbon, it has a longer service life and can greatly reduce user costs. Therefore, whether in terms of efficiency or from the perspective of consumers, activated carbon is azuiExcellent air purification filter material.
Used in industry for deodorization, detoxification, air conditioning filters, air purifiers, central air conditioning filtration systems, air filters, air purifiers, car filters, etc. in various workplaces.
Physical and chemical performance analysis of exhaust gas adsorption activated carbon:

Analyze the project	test data	Analyze the project	test data
granularity	30-60 mesh	Dry reduction%	≤10
iodine value	≥900-1200mg/g	bulk specific gravity	0.48-0.53g/cm3
Specific surface area	>1200m2/g	moisture content	≤10%
total pore volume	>0.85cm3/g	CTC	80
ash content	≤6 %	ph value	7-8
Intensity%	95	Ignition point ℃

Precautions for transporting activated carbon for waste gas adsorption:
1. During transportation, activated carbon should be prevented from mixing with hard substances and should not be stepped on to prevent carbon particles from breaking and affecting quality.
2. Storage should be carried out on porous adsorbents, so during transportation, storage, and use, it is necessary to absolutely prevent water immersion, as a large amount of water will fill the active voids after immersion, rendering them ineffective.
3. To prevent tar substances from entering the activated carbon bed during use, tar substances should be prohibited from blocking the pores of the activated carbon and causing it to lose its adsorption function. Zui has coke removal equipment to purify gas.

4. When storing or transporting fire-resistant activated carbon, direct contact with a fire source should be avoided to prevent ignition. During the regeneration of activated carbon, oxygen should be avoided and the regeneration should be thorough. After regeneration, it must be cooled with steam to below 80 ℃, otherwise the temperature will be high and the activated carbon will spontaneously ignite when exposed to oxygen.

Exhaust gas adsorption activated carbon manufacturer:

Powdered activated carbon shipment: