Epoxy composite coated steel pipe, also known as coated pipe, steel plastic composite pipe, or coated composite steel pipe, is a steel plastic composite steel pipe that uses a steel pipe as the substrate and fuses a plastic anti-corrosion layer on the inner surface of the steel pipe (bottom pipe) or on the inner and outer surfaces through spraying, rolling, immersion, and suction processes.

Epoxy composite coated steel pipes have excellent corrosion resistance and relatively low friction resistance. Epoxy resin coated steel pipes are suitable for transporting media such as water supply and drainage, seawater, warm water, oil, and gas, while polyvinyl chloride coated steel pipes are suitable for transporting media such as drainage, seawater, oil, and gas.

Common colors for epoxy composite coated steel pipes: black, gray, blue, red, white, green

Epoxy composite coated steel pipe coating thickness: PE (modified polyethylene) coating thickness is 400um-1000um, EP (epoxy resin) spraying thickness is 100um-400um

Coating method: PE (polyethylene) is hot-dip molded EP, (epoxy resin) is sprayed inside and outside

Epoxy composite coated steel pipe product specifications: DN15-DN1660 Environmental temperature: -30 ℃ to 120 ℃

Epoxy composite coated steel pipe connection methods: threaded (DN15-DN100), grooved (DN65-DN400), flanged (applicable to any diameter), welded, bimetallic connection, socket, pipe joint, sealed connection, etc

Epoxy composite coated steel pipe is a product that uses PE (modified polyethylene) for hot-dip molding or EP (epoxy resin) for internal and external coating, and has excellent corrosion resistance. At the same time, the coating itself also has good electrical insulation and will not produce electrical corrosion. Low water absorption rate, high mechanical strength, low friction coefficient, capable of achieving long-term use. It can also effectively prevent damage to plant roots and soil environmental stress. Convenient connection and easy maintenance.

Advantages of epoxy composite coated steel pipe products

1. Adapt to buried and humid environments, and can withstand high and extremely low temperatures.

2. Strong anti-interference ability. If plastic coated steel pipes are used as cable conduits, they can effectively shield external signal interference.

3. It has good compressive strength, with a maximum pressure of up to 6Mpa.

4. Good insulation performance, as a protective tube for wires, it will never experience leakage.

5. No burrs, smooth pipe wall, suitable for threading wires or cables during construction.

Key points for construction and installation of epoxy composite coated steel pipes

It should be executed in accordance with the Technical Specification for Building Water Supply Coating Composite Pipe Engineering CECS125:2001.

The following construction equipment should be selected for epoxy composite coated steel pipes:

(1) Cutting should be done using a metal saw;

(2) Special groove rolling machines should be used for groove pressing;

(3) Bending pipes should be done using a bending machine for cold bending;

(4) The threading should be carried out using an electric threading machine for pipe thread processing;

(5) The deburring and corner processing of coated steel pipe ports should be carried out using a file;

(6) The application of high-strength inorganic solvent liquid epoxy resin coating should use a small brush or toothbrush.

The construction procedure of epoxy composite coated steel pipes should meet the following requirements:

(1) Epoxy composite coated steel pipes should not be buried in reinforced concrete structural layers;

(2) Welding is prohibited during the installation of epoxy composite coated steel pipes;

(3) The installation of epoxy composite coated steel pipes should gradually connect from a large diameter to a small diameter, and the pipe openings should be promptly sealed;

(4) Epoxy composite coated steel pipes are strictly prohibited from being thrown or violently impacted during transportation, loading and unloading, and construction on site;

(5) When installing epoxy composite coated steel pipes, if the pipe diameter is not greater than DN50, a pipe bending machine can be used for cold bending, but the bending curvature radius shall not be less than 8 times the pipe diameter, and the bending angle shall not exceed 10 °.