Picture of electric remote control float valve

Electric remote control float valve Puhui brand

Introduction to Electric Remote Control Float Valve

Electric remote control floating ball valve product models: Electric remote control floating ball valve 106X, Electric remote control floating ball valve HC106X. Product specifications: Small DN40mm, Large DN600mm; Pressure levels of 1.0MPa, 1.6MPa, and 2.5MPa; The shell material is cast iron. The power supply voltage is 220V. The electric remote control float valve HC106X is100X remote control floating ball valveOn the basis of this, an electromagnetic valve electronic control device was installed, which gives the remote control float valve a dual function.

Electric remote control float valveIt is a water level control valve that can be remotely operated to open or close. This product is suitable for liquid level control systems in various water tanks, pools, and water towers in industrial and civil buildings. It has the characteristics of novel structure, good sealing effect, low resistance, large flow rate, and long service life. A manual control device is installed on this electric remote control float valve. When there is a power outage or circuit failure, this valve can still be opened or closed.

Main parameters of electric remote control float valve

Nominal pressure: 1.0MPa-1.6MPa-2.5MPa;

Low action pressure: ≥ 0.02MPa；

Specification caliber: 50 to 600mm;

Medium temperature: 0 to 80 degrees;

Applicable medium: clear water;

Connection form: flange;

Shell material: cast iron or brass.

Performance characteristics of electric remote control floating ball valve

1. Small floating ball guide valve operation, hydraulic control main valve direct action type.
2. The main valve channel is designed with full flow and low head loss.
3. The main valve body and control pilot valve can be installed in combination or separately.
4. The control valve is suitable for any diameter of main valve body.
5. The electric remote control float valve is easy to install and maintain, and the control valve is installed separately from the main valve, requiring only one conduit
6. Additional solenoid valve control can form a channel protection to prevent overflow.

Working principle of electric remote control float valve:

Electric remote control floating ball valve is based on mechanical remote control floating ball valve, with the addition of electromagnetic valve connected to power, achieving dual control of power and machinery.

1. Opening process of electric remote control float valve: When the liquid level drops, the float ball also drops, and the pilot valve is opened to release the pressure in the main valve control room, and the main valve is opened to replenish water.
2. Closing process of electric remote control float valve: When the liquid level reaches the control height, push the float valve to close the pilot valve, causing the main valve control room to start pressurizing and gradually closing the main valve.

Structure and dimensions of electric remote control floating ball valve:

Puhui ValveElectric remote control float valveProvide free installation solutions Looking forward to your call: 0317-8294124! Similar products include: PuhuiKYF type floating ball hydraulic water level control valve、F745X remote control float valveSupporting productsY-shaped filterClick to view!

Comparison with similar products of electric remote control floating ball valve