E+H/Endress+Hauser/Endress HauserWhen used in conjunction with Fieldgate FXA320 (which remotely queries measurement values through Internet technology), Liquicap is an ideal choice for inventory management solutions.

The instrument is not affected by the dielectric constant (dc), the conductivity of the liquid is 100 μ S/cm, and it allows measurement of multiple liquids without the need for recalibration.

• Process connection: flange and thread

• Process pressure:- 1...+100 bar (+1.450 psi)

• Measurement range: 0.1... 4.0 m (0.3... 13 ft)

• Temperature:- 80...+200°C (-112...+392°F)

• International explosion-proof protection certification, overflow protection WHG, SIL， Sanitary certification, classification certification

• Fully insulated rod probe, suitable for standard and harsh working conditions (temperature, process, adhesion)

• Interface measurement

  Liquid/liquid interface with lotion layer

• E+H/Endress+Hauser/Endress Hausercharacteristic

  Shield segment length
  Factory calibration
  short response time

• Power/Communication

  12...36 DC HART
  PFM

• measurement accuracy

  Repeatability is 0.1%

• Linear error in measurement of conductive liquids

  <0.25%

• ambient temperature

  -50...+70°C
  -58...+158°F

• process temperature

  -80...200°C
  -112...392°F

• Process pressure (absolute pressure)/maximum overpressure limit value

  Vacuum 100 bar
  (Vacuum... 1450 psi)

• Main liquid receiving components

  Insulation material: PTFE、PFA
  316L

• Process connection

  G1/2、G 3/4、G 1、G1 1/2 /NPT 1/2、NPT 3/4、NPT 1'、NPT1 1/2
  Minimum flange diameter DN25.../ASME 1 '/ JIS...

• Sanitary process connection

  Tri Clamp ISO02852 clamp, no gap
  Milk connector
  Flat installation

• sensor length

  Total length: 6m (20ft)
  Shielding section length: maximum 2m (7ft)

• Maximum measurement distance

  0.1...4.0 m
  (0.3...13 ft)

• communication

  4...20mA HART
  PFM

• Certificates and certifications

  ATEX、FM、CSA、IEC Ex、TIIS、INMETRO、NEPSI

• safety certification

  Overflow protection WHG
  SIL

• Design certification

  EN 10204-3.1
  NACE MR0175

• Sanitary certification

  3A EHEDG

• Classification certification

  GL/ ABS/ DNV

• option

  Separated shell
  Sealing ring of airtight probe

• Application Restrictions

  The gap with the top of the warehouse is too small
  Change, non-conductive medium, conductivity<100 μ S/cm
  
  Pay attention to reducing pressure and temperature