VIP member
Double-layer speed controlled oscillator
The double-layer speed controlled oscillator is a series of instruments that can both cultivate and prepare biological samples, as well as be suitable
Product details
1Principles and Applications
According to the different needs of users, our factory produces the HY-6A double-layer oscillator variety, which uses new materials, technologies, and processes as much as possible to give the product a new look and make it easy to use. Suitable for health and epidemic prevention, environmental monitoring research units, colleges and universities, industrial and mining enterprises, and other units. It is also suitable for chemical analysis and uniform mixing of various samples. It is also suitable for biochemical cultivation and oscillation of various fungi.
This instrument utilizes the characteristics of a permanent magnet DC motor: by adjusting the voltage, the oscillation frequency of the instrument is effectively changed to achieve the desired oscillation speed.
IIIusage method:
The panel is equipped with a power switch. When using, first align the timer knob with the "ON" normally open position, then turn on the power switch, pay attention to the position of the timer knob, and adjust the speed control potentiometer knob according to your desired oscillation frequency. The oscillation speed is displayed digitally, and the desired speed can be determined based on the displayed number Using at medium speed within the speed range can extend the lifespan of the instrument.
4Technical indicators:
1. Oscillation frequency: Start -250 times/minute
2. Oscillation amplitude: 20mm
3. Power supply: 220V ± 10 50Hz
4. Power consumption: 400W
5. High load: 30kg
6. Timing: 0-120 minutes
7. Environmental temperature: -10~50 ℃, relative humidity: 85%>
8. Oscillation mode: reciprocating
9. Standard fixture: Stainless steel universal spring fixture
10. Optional: 250ml * 20 * 2 500ml * 12 * 2 1000ml * 8 * 2 (special flask fixture)
5、 Precautions:
1 The instrument casing should be properly grounded to prevent accidents.
2 When not in use for a long time, the power should be cut off and placed in a ventilated and dry place.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-