Product Introduction

PetroFLAG soil total petroleum hydrocarbon rapid detector, easy to carry, can complete sample detection in 5 minutes. The instrument has 15 built-in response factors, which can correspond to weathered gasoline to heavy crude oil. Applied to oil pollution site assessment, oil product leakage risk assessment, oil pipeline leakage risk assessment, soil remediation monitoring, and on-site environmental assessment.

The total petroleum hydrocarbons (TPH) in Dexsil's PetroFLAG soil system is an on-site testing kit used to determine the total petroleum hydrocarbon content in soil. It is easy to use, inexpensive, and environmentally safe. The PetroFLAG system does not distinguish between aliphatic and aromatic hydrocarbons, but quantifies all oils, fats, and fuels as total hydrocarbons. Analyze using 10 grams of soil sample and three simple steps: extraction, filtration, and analysis.

The PetroFLAG system fills the gap of hydrocarbons in the soil testing process. get rid ofBeyond cost and time, laboratory methods (such as...)EPA 8015) mayIgnore heavier hydrocarbons such as fuel oil, engine oil, grease, etc. method418.1 was previously the only broad-spectrum on-site testing method for "total petroleum hydrocarbons" in soil. Although it was very accurate for dry soil samples, its efficiency for wet soil testing was very low. In addition to being convenient, fast, and low-cost, the PetroFLAG system overcomes these limitations whileIt is also an excellent choice.The PetroFLAG system includes everything necessary to conduct up to ten soil tests. A briefcase sized suitcase can easily transport all necessary equipment.

The PetroFLAG analyzer is a handheld, portable, and lightweight device capable of running 4000 types of hydrocarbons in soil testing on a 9-volt battery. Fifteen response factors (related to density such as heavy crude oil or sparsity such as weathered gasoline) were programmed into the PetroFLAG analyzer for use based on the analyte of interest. The PetroFLAG analyzer adopts a simple menu driven interface and EEPROM storage system, designed for on-site use. The PetroFLAG system includes a set of calibration standards for measuring hydrocarbons in soil, a timer, an electronic balance, a carrying case, and ten tests. Other PetroFLAG reagents are availablePurchase separately.

Reagent type

1-Reaction reagent

PetroFLAG reagents are packaged in boxes of 10 each, which also includes a set of calibration solutions, one "0" and one 1000ppm solution. The size of the box is specially designed to fit perfectly in the PetroFLAG portable case, making it easy to carry and replace reagents. To ensure the quality of the testing, all reagents have been pre tested and packaged in glass ampoules.

2-extractant

PetroFLAG's extractants have high extraction efficiency for all types of soil, including road sand and gravel, coastal sediment, and clay.

3-Chromogenic solution

Specially designed colorimetric solution is used to precipitate hydrocarbons from the solution, forming uniformly sized and stable micro clusters that can exist for a period of time. Then, the colorimetric solution tube is placed into the analyzer for quantification.

-Compact and lightweight, easy to carry

-Fast detection speed, sample testing can be completed in 5 minutes

-Compliant with EPA methods

-Menu based operation, easy to use

-The detection limit is 2000ppm, and using PetroFLAG's high range reagent, it can also detect samples with hydrocarbon content exceeding 2000ppm

Oil pollution site assessment, oil product leakage risk assessment, oil pipeline leakage risk assessment, soil remediation monitoring, on-site environmental assessment

Analyte: Petroleum hydrocarbons

Matrix: Soil

Detection method: turbidity method

Detection range: (MDL) 15-2000 ppm (depending on the analyte)

Analysis time: Process 1-10 samples within 15 minutes

Do itDisturbance: Natural hydrocarbons

Accuracy: 10% ± MDL