Product Introduction:

Delger water vapor detection tubeIt is a Delger compressed air quality testing instrument used for testing dew point meters and water detection consumables. The measured result is humidity, which can be converted into dew point temperature values. It is simple and economical, and can directly replace dew point meters for GMP certified compressed air dew point testing,Delger water detection tubeThere are two specifications: 8103061 (20-1500mg/m3) and 6728531 (2-450mg/m3).

Delger water vapor detection tubeMainly used to detect the water content in compressed air, which can be converted into dew point values and directly replace dew point meters. At present, there are two main specifications of Delger water detection tubes. The Water Vapour 20/a-P (for HP/alpha) with order number 8103061 has a range of 20-1500mg/m ³, while the Water Vapour 5/a-P (for CO2) with order number 6728531 has a range of 2-450 mg/m3.Delger water detection tubeGenerally, it needs to be used in conjunction with the Delger compressed air quality detector, and can also be equipped with Delger oil detection box, CO detection tube, and CO2 detection tube to detect the oil content, CO content, and CO2 content in compressed air.

Water detection tube 8103061 Product introduction:

The Water Vapor 20/a-P detection tube requires special handling!

Break the end of the detection tube pointed by the arrow, and only scratch the end away from the arrow

• Open the compressed air source

Insert the end pointed by the arrow into the "H2O" detection channel

Cut off the end that deviates from the arrow and immediately insert it into the detection channel

• Start timing

be careful! Please be careful not to inhale the gas expelled from the system!

Dew point description for water detection tube 8103061:

The range of Delger water vapor detection tube 8103061 is 20-1500mg/m ³, corresponding to a dew point of:- 76 to 13 º Ctd. More suitable for measuring low dew point conditions, very suitable for GMP certification requirements -40 º Ctd use, with a long detection time of 10 minutes. The measured value is the humidity value, and the dew point value measured by the gas point from the same pipeline is the same. It does not require a power supply and can also be used in explosion-proof spaces.

The Delger 6728531 water detection tube has a small range and is strictly not suitable for detecting dew points, as it has a small range and is suitable for enterprises with low water content and high requirements.