VIP member
DQJ-1 DC Single Bridge Calibration Device
Product Introduction DQJ-1 DC Single Bridge Calibration Device is produced in accordance with JJG982-2003 DC Resistance Box Calibration Regulations an
Product details
Product IntroductionProduct Introduction
The DQJ-1 DC single bridge calibration device is produced in accordance with the JJG982-2003 DC Resistance Box Calibration Regulations and JJG125-2004 DC Bridge Calibration Regulations, and is used for the overall calibration of portable single bridges. There are ten ten ten pin resistor pads with a measurement upper limit of 11 M Ω and a minimum step voltage of 1 m Ω, which can cover all measurement limits of portable single bridges and have the minimum resolution requirement for verifying the bridge. This device has different accuracies depending on the range of the bridge, so the ten pin resistor plate has different accuracies.
Product ParametersProduct Parameters
1. Accuracy, power or current of the measuring disc
| Ten pin resistor disk | ×1MΩ | ×100kΩ | ×10kΩ | ×1kΩ | ×100Ω |
| Accuracy (%) | 0.1 | 0.05 | 0.02 | 0.02 | 0.02 |
| power | 0.05W | ||||
| Ten pin resistor disk | ×10Ω | ×1Ω | ×0.1Ω | ×0.01Ω | ×0.001Ω |
| Accuracy (%) | 0.05 | 0.2 | 1 | 5 | 20 |
| Power or current | 0.05W | 0.5A | 1A | 1A | |
For the convenience of calculation, the residual resistance value is the first indication of the ten pin resistor disk with a resistance of x 0.01 Ω.
3. Operating environment
The ambient temperature is 20 ℃± 2 ℃; Relative humidity 40%~60% RH
4. Insulation resistance
The resistance between the circuit of the device and any other external metal or component that is not electrically connected to the circuit is 500 M Ω.
5. Power frequency withstand voltage
6. Volume and weight: 320 × 200 × 120 (mm); 2kg。
Note:
1. The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice. If there is any act of theft or copying, legal responsibility will be pursued.
2. To learn more about Hertz products, please enter the product center. Service Hotline:
Product featuresProduct Characteristics
●It can measure DC resistance within the range of 10-6~106 Ω.
●Measure the resistivity of metal materials, contact resistance of electrical equipment such as switches, relays, contactors, and DC resistance of motor and transformer windings.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-