Coal to gas gas analyzer, calorific value analyzer

Coal to gas conversion project:

Coal to gas conversion or gas based regional heating with heat and steam as the main sources should be the current main market. To achieve balanced heating in the large-scale heating network, gas regional heating and urban large-scale heating networks are integrated and supplemented for development. The gas analyzer for coal to gas conversion project has a monitoring effect on gas quality control,

Coal to gas gas analyzer, calorific value analyzer

Coal to gas gas analyzer, calorific value analyzerTemperature control indicators:

1) Column box: Room temperature+5 ℃ -399 ℃

2) Sample injector: Room temperature+5 ℃ -399 ℃

3) Detector: Room temperature+5 ℃ -399 ℃

4) Column temperature box volume: 248*248*260MM

5) Program temperature rise order: fifth order linear range rise

6) Program heating rate: 0.1 ℃~30 ℃/min (1 ℃ increment)

The maximum high heating rate below 200 ℃ can reach 40 ℃/min (1 ℃ increment)

7) Constant temperature holding time for each stage: 0~9999.9min (increments of 0.1min)

Gas path：

The gas path adopts a dual design of first stabilizing the voltage and then stabilizing the current; Stable regulation mode, with high precision, high reliability, and convenient and intuitive flow regulation. Equipped with gas cut-off/leakage protection and prompt function, it can automatically cut off TCD bridge current, maximizing the protection of rhenium tungsten wire from damage.

Coal to gas gas analyzer, calorific value analyzerMain components：

Composed of chromatography furnace hall (stainless steel), fan, heating wire, temperature sensing platinum wire resistor, insulation layer, shell, exhaust and intake device, etc. The heating wire of the column box is hidden behind the mesh plate, effectively avoiding peak splitting caused by heating wire radiation. This machine adopts a low-noise motor, which runs smoothly and has low vibration. When the column box needs to be cooled, the cooling air inlet and hot air outlet at the rear of the box automatically open, and the cooling air enters the column box from the inlet, replacing the hot air inside the column box from the hot air outlet to quickly cool the column box.