advantage:

1. The pressure can be freely adjusted, with a range of 1-5KG (users can adjust according to the number of machines in the injection molding workshop and the cooling needs of the product mold)

2. Stable and balanced water pressure and flow rate; The entire water supply system, regardless of whether the injection molding machines are arranged at the front or rear end of the inlet main pipe, or at a distance or close distance, all injection molding machines in the workshop are turned on or partially turned on, and the pressure of the cooling water is stable and the flow rate is steady. The water pressure difference between the front and rear ends is between 0.1-0.2KG (conventional water supply engineering; the pressure at the front end of the injection molding machine is high, the pressure at the back end is low, the flow rate at the front end is high, and the pressure at the back end is low, making it difficult for the injection molding machine to achieve stable cooling).

3. Automatic water supply for injection molding machines; The advantages of turning on water supply and turning off water supply are: no manual switching, water saving, and energy saving (conventional engineering, manual operation, time-consuming and labor-intensive, non energy saving).

4. Automatic voltage stabilization; The system water supply is within the set value range, and all or a small part of the injection molding machines in the workshop are turned on. The main pipe pressure equalization circuit is equipped with an automatic pressure stabilizing and releasing valve, which has the advantages of energy saving, light water pump operation load, long motor service life (conventional engineering; when the pressure increases, the motor load increases, power consumption increases, and even water pipe bursts).

5. Variable frequency operation of water pump; The balanced pressure system operates within the set water pressure and flow parameters, controlled by a pressure and flow sensor PLC to operate the motor with variable frequency, which has the advantage of energy saving (conventional engineering; this function is not available).

6. Water quality scale sedimentation treatment; The water tank is divided into three stages: reverse water tank, sedimentation, and filtration, which have their advantages; Low cost treatment of scale, anti blocking and ensuring the cooling effect of mechanical circulating water.

7. Low cost, high efficiency, and excellent quality; Constant pressure water supply can shorten the production cycle of plastic products, improve economic efficiency, and stabilize product quality. The investment cost of constant pressure water supply projects may be about 10-15% higher than that of conventional water supply projects, but the usage cost is about 10% more energy-efficient than conventional ones. A one-time investment can bring long-term benefits.

8. Maintenance and upkeep; The balanced pressure water supply system equipment has high efficiency and low load. The equipment automatically switches to motor operation with low failure rate. Our company provides long-term maintenance services and trains operators, so users can use it with confidence.