Cable type float level switch-Fornitore globale

B3 Floor, Wuhan University Science and Technology Park, Daxueyuan Road, Donghu New Technology Development Zone, Wuhan City

Cable type float level switch is a simple instrument used for level control in tanks, water pools, and other areas. This product is injection molded, so the structure is sturdy, the price is low, and the service life is long. For long-distance, multi-point liquid level control, submersible pumps or liquids containing granular/blocky impurities are more advantageous. Cable type float level switch is a simple and easy-to-use liquid level control instrument. It has no complex circuits and is not affected by electromagnetic interference. It is suitable for controlling the operation of liquid pumps and adjusting the liquid level. It can also be installed in submersible pumps to control and protect the electric motor. There are two types of float materials: plastic and stainless steel.
Application areas:
1. Sewage treatment, water production industry, circulating water technology, and other technological processes;
2. There are dual chambers and a sports protection layer to ensure absolute sealing of the floating ball;
3. Adjust the switch point by adjusting the position of the heavy block;
4. Non toxic materials and non mercury micro switches can be used in the drinking water industry;
5. The shell is made of engineering plastic or stainless steel, with high mechanical strength;
6. Simple structure, easy to use, high cost-effectiveness;

Cable type float level switch is designed based on the principles of gravity and buoyancy. When the float changes with the liquid level and rises a certain angle from the heavy hammer (tie) as the origin, the switch set inside the float will output an ON or OFF contact signal.

ZYK620 plastic material floating ball injection molding is a solid structure with stable and reliable performance. It is non-toxic, corrosion-resistant, easy to install, and cost-effective, making it particularly suitable for use in corrosive environments.

The ZYK621 metal cable float level switch is mainly characterized by high temperature resistance, high flexibility cable, and durability.

1. The length of the float movement must be less than the distance between the groove wall and the cable, otherwise it may cause incorrect movement. The minimum water level controlled by the float must be greater than the minimum water level of the pump to protect the motor;
2. The installation position should be kept at an appropriate distance from the inlet of the pumping pump to prevent the float switch from being sucked into the inlet;
3. The installation position should be kept at an appropriate distance from the inlet to avoid incorrect induction caused by water impact; If unavoidable, anti wave tubes or anti wave plates can be installed to improve the situation;