VIP member
Borematic (rapid three-point inside micrometer)
Borematic (rapid three-point inside micrometer)
Product details
Borematic（Quick three-point inside micrometer）
568Series -ABSOLUTEDigimaticInner diameter table
BorematicMore accurate and efficient measurements can be achieved than ever before. By“ORIGIN”The button will set the origin point, and this setting will be maintained until the battery is depleted. Therefore, there is no need to repeatedly set the origin.
characteristic
The titanium coated measuring needle (with a measurement range greater than 12mm) has good durability and impact resistance, and can directly measure the inner diameter of blind holes at the bottom.
A large LCD digital display screen with a height of 8.5mm ensures no misreading.
330?Rotating display device for easy measurement at any angle.
Has GO/NO-GO judgment function.
Using an ABLUTE linear encoder, there is no need to worry about overspeed errors.
Equipped with SPC data output.
Calibration ring gauge (optional) can be used for origin setting.
The extension rod (optional) can be used to measure deep holes.
Measurements can be taken near the bottom of blind holes.
technical parameter
Accuracy: Refer to performance parameters
Resolution: 0.001mm or 0.00005 "/0.001mm
Measuring needle: hard alloy or titanium coating*
（*Measurement range greater than 12mm/. 5 "model
Measurement method: three-point method
Display: LCD display
Battery: SR44 (1 unit) (938882)
Battery life: approximately 1 year
function
Zero adjustment, pre adjustment, GO/ON-GO judgment function, data retention, automatic power on/off, data output, imperial/metric conversion (imperial/metric type)
Options
937387: SPCCable (1m)
965013: SPCCable (2m)
952322:Extension rod for 6-12mm (. 275 "-. 500" inner diameter gauge)
952621:Extension rod for 12-20mm (. 50 "-. 80" inner diameter gauge)
952622:Extension rod for 20-50mm (. 8 "-2.0" inner diameter gauge)
952623:Extension rod for 50-125mm (2.0 "-5.0" inner diameter gauge)
Performance parameters:
Metric type | ||
measuring range |
Item number |
Accuracy* |
6-8mm |
568-331-10 |
± 5 μ m (less than 5 μ m) |
8-10mm |
568-332-10 |
± 5 μ m (less than 5 μ m) |
10-12mm |
568-333-10 |
± 5 μ m (less than 5 μ m) |
12-16mm |
568-334-10 |
± 5 μ m (less than 5 μ m) |
16-20mm |
568-335-10 |
± 5 μ m (less than 5 μ m) |
20-25mm |
568-336-10 |
± 6 μ m (less than 6 μ m) |
25-30mm |
568-337-10 |
± 6 μ m (less than 6 μ m) |
30-40mm |
568-338-10 |
± 6 μ m (less than 6 μ m) |
40-50mm |
568-339-10 |
± 6 μ m (less than 6 μ m) |
50-63mm |
568-340-10 |
± 6 μ m (less than 6 μ m) |
62-75mm |
568-341-10 |
± 6 μ m (less than 6 μ m) |
75-88mm |
568-342-10 |
± 6 μ m (less than 6 μ m) |
87-100mm |
568-343-10 |
± 6 μ m (less than 6 μ m) |
100-113mm |
568-344-10 |
± 6 μ m (less than 6 μ m) |
112-125mm |
568-345-10 |
± 6 μ m (less than 6 μ m) |
50-75mm |
568-346-10 |
± 6 μ m (less than 6 μ m) |
75-100mm |
568-347-10 |
± 6 μ m (less than 6 μ m) |
100-125mm |
568-348-10 |
± 6 μ m (less than 6 μ m) |
Imperial/metric systemSingle probe with titanium coating
| ||
measuring range |
Item number |
accuracy |
.275"-.350" |
568-431-10 |
±. 00025 "(less than. 00025") |
.350"-.425" |
568-432-10 |
±. 00025 "(less than. 00025") |
.425"-.500" |
568-433-10 |
±. 00025 "(less than. 00025") |
.50"-.65" |
568-434-10 |
±. 00025 "(less than. 00025") |
.65"-.80" |
568-435-10 |
±. 00025 "(less than. 00025") |
.8"-1.0" |
568-436-10 |
± 0.003 "(less than 0.003") |
1.0"-1.2" |
568-437-10 |
± 0.003 "(less than 0.003") |
1.2"-1.6" |
568-438-10 |
± 0.003 "(less than 0.003") |
1.6"-2.0" |
568-439-10 |
± 0.003 "(less than 0.003") |
2.0"-2.5" |
568-440-10 |
± 0.003 "(less than 0.003") |
2.5"-3.0" |
568-441-10 |
± 0.003 "(less than 0.003") |
3.0"-3.5" |
568-442-10 |
± 0.003 "(less than 0.003") |
3.5"-4.0" |
568-443-10 |
± 0.003 "(less than 0.003") |
4.0"-4.5" |
568-444-10 |
± 0.003 "(less than 0.003") |
4.5"-5.0" |
568-445-10 |
± 0.003 "(less than 0.003") |
2.0"-3.0" |
568-446-10 |
± 0.003 "(less than 0.003") |
3.0"-4.0" |
568-447-10 |
± 0.003 "(less than 0.003") |
4.0"-5.0" |
568-448-10 |
± 0.003 "(less than 0.003") |
*Accuracy does not include quantization bias（Maximum deviation）
Complete set
Including a complete set of measuring tools (display device and measuring heads of various sizes).
Metric type | ||||
measuring range |
Item number |
Single measurement range |
Calibration environmental gauge |
remarks |
6-12mm |
568-981-10 |
6-8,8-10,10-12mm |
ø8mm,ø10mm |
|
12-25mm |
568-982-10 |
12-16,16-20,20-25mm |
ø16mm,ø20mm |
|
25-50mm |
568-983-10 |
25-30,30-40,40-50mm |
ø25mm,ø40mm |
|
50-75mm |
568-984-10 |
50-63,62-75mm |
ø62mm |
|
75-100mm |
568-985-10 |
75-88,87-100mm |
ø87mm |
|
50-100mm |
568-986-10 |
50-75*,75-100mm* |
ø62mm,ø82mm |
|
*4 sets of replaceable probes
| ||||
Imperial system type | ||||
measuring range |
Item number |
Single measurement range |
Calibration environmental gauge |
remarks |
.275"-.5" |
568-987-10 |
.275-.35",.35-.425",.425-.5" |
ø.35"DIA,ø.425"DIA |
|
.5"-1" |
568-988-10 |
.5-.65",.65-.8",.8-1" |
ø.65"DIA,ø.8"DIA |
|
1"-2" |
568-989-10 |
1-1.2",1.2-1.6",1.6-2" |
ø1.2"DIA,ø1.6"DIA |
|
2"-3" |
568-990-10 |
2-2.5",2.5-3" |
ø2.5"DIA |
|
3"-4" |
568-991-10 |
3-3.5",3.5-4" |
ø3.5"DIA |
|
2"-4" |
568-992-10 |
2-3"*,3-4"* |
ø2.5"DIA,ø3.5"mm |
|
*4 sets of replaceable probes
| ||||
Replaceable probe set
Including display devices with special size replaceable probes.
Metric type | ||||
measuring range |
Item number |
Single measurement range |
Calibration environmental gauge |
remarks |
6-12mm |
568-971-10 |
6-8,8-10,10-12mm |
ø8mm,ø10mm |
|
12-25mm |
568-972-10 |
12-16,16-20,20-25mm |
ø16mm,ø20mm |
|
25-50mm |
568-973-10 |
25-30,30-40,40-50mm |
ø25mm,ø40mm |
|
50-100mm |
568-974-10 |
50-63,62-75,75-88,87-100mm |
ø62mm,ø87mm |
|
50-100mm |
568-975-10 |
50-75*,75-100mm* |
ø62mm,ø82mm |
|
*4 sets of replaceable probes
| ||||
Imperial system type | ||||
measuring range |
Item number |
Single measurement range |
Calibration environmental gauge |
remarks |
.275"-.5" |
568-976-10 |
.275-.35",.35-.425",.425-.5" |
ø.35"DIA,ø.425"DIA |
|
.5"-1" |
568-977-10 |
.5-.65",.65-.8",.8-1" |
ø.65"DIA,ø.8"DIA |
|
1"-2" |
568-978-10 |
1-1.2",1.2-1.6",1.6-2" |
ø1.2"DIA,ø1.6"DIA |
|
3"-4" |
568-979-10 |
2-2.5",2.5-3",3-3.5”, 3.5-4" |
ø2.5"DIA,ø3.5"DIA |
|
2"-4" |
568-980-10 |
2-3"*,3-4"* |
ø2.5"DIA,ø3.5"mm |
|
*4 sets of replaceable probes
| ||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-