Overview of AW pneumatic actuator products

AW pneumatic actuators are divided into double acting and single acting (spring reset) types, with two separate cylinders that output large torque and operate flexibly and smoothly; The piston rod is plated with hard chromium, which has good wear resistance; All sliding components are equipped with oil-free lubrication shafts and guide rings to reduce friction coefficient and extend service life. The U-shaped curve characteristic output torque of AW pneumatic actuators is more suitable for large-diameter ball valves, butterfly valves, etc.

　　Technical Parameter

Product Name: AW Pneumatic actuator

Product category: Pneumatic actuator

Product model: AW-B=double acting; AW-S=single acting (spring reset)

Basic design: Pneumatic dual cylinder dual piston fork type transmission mechanism

Rotation angle: Double acting=90 ° Single acting=90 ° Adjustable angle from both ends -5 °~+5 °

Working environment temperature:- 20℃~90℃

Gas source pressure: 0.4~0.7Mpa (maximum 1.0Mpa)

Scope of use: Suitable for large-diameter ball valves, butterfly valves, etc

　　Model designation

1. Pneumatic actuator ------------------------------------------ AW-B

2. Cylinder inner diameter size specification 13/17/20/28/35/40

3. Single acting (spring reset)

4. Hand operated mechanism ----------------------------------------------------------------------

　　Part Material

　　Single acting output torque meter

　　Double acting output torque meter