VIP member
ACM4806E and ACM4826E stepper motor drivers
ACM4806E and ACM4826E stepper motor drivers
Product details
Watch this video to learn more about the IDEA Drive technology!
The ACM4806E and ACM4826E stepper motor controllers communicate using RS-485 and have two rated currents to choose from. In addition to standalone models, the driver can also be integrated into motors and linear stepper motors.
-
specifications+
Part number ACM4806E ACM4826E
Driver input voltage range
12-48VDC 12-48VDC
Maximum driver current/phase
0.6 A rms
2.6 A rms
Current overload capacity
During acceleration, there may be a 30% current overload
communication
RS-485
RS-485 stepping mode
Full step, half step, 1/4, 1/8, 1/16, 1/32, 1/64
Digital I/O voltage range 5 to 24 VDC
input
4 Input maximum current
8 mA (each)
8 mA (each)
Output (Decrease)
4 Output maximum current (decrease)
200 mA
maximum temperature Measured at 70 ° C at the radiator
Program storage size 85 Kb
Program storage memory type
flash memory Maximum number of stored programs 85- referenced by a 10 character program name Position counter range 64 bit
slope trapezoid
interrupt source
4 inputs (rising edge, falling edge, or two edges) internal position counter (when reaching the programmed position)
Maximum number of drivers per communication bus
225 225 size
64 x 60 x 34.4 millimeters
64 x 60 x 34.4 millimeters
-
Software programming+
-
dimension+
-
accessory+
accessory Part number USB cable (A to mini B), 2 meters 56-1346 Power cord, 1 meter 56-1348 I/O cable, 1 meter 56-1352 RS-485 cable, 1 meter 56-1536-4 Encoder cable, 0.3 meters 56-1715 Software installation CD 55-010 Motor connector assembly 56-1453 USB to RS-485 adapter UTR4852 -
CONNECTION DIAGRAM+
Table "A" Pin number describe pay attention to 1 Grounded I/O power supply 5 - 24 VDC 2 +I/O power supply 5 - 24 VDC 3 Enter 1 4 Enter 2 5 Enter 3 6 Enter 4 7 Output 1 8 Output 2 9 Output 3 10 Output 4 Table "B" Pin number describe 1 Y/Non inverting driver output 2 Z/Inverted Driver Output 3 grounding 4 grounding 5 A/Non inverting receiver input 6 B/Inverted receiver input Table "C" Pin number describe 1 +5V 2 grounding 3 Index/No Connection 4 Channel B 5 Channel A -
Integrated motor and actuator+
configuration series maximum force step length maximum thrust (N) (Microns) (Watt) Size 17 single stack thick linear stepper motor 43000 220 1.5 - 50 2.31 Size 17 Double Stacked Thick Linear Stepper Motor 43000 337 15.8 - 127 4.62 -
download+
Driver manual- Communication manual
- software user manual
- Hardware Manual
interface software- IDEA graphical user interface software v3.23
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-