VIP member
9000MNME series online methane/total hydrocarbons/non methane total hydrocarbons analyzer
9000MNME series online methane/total hydrocarbons/non methane total hydrocarbons analyzer
Product details
Product Overview:
9000MNME is used for rapid determination of total hydrocarbons, methane, and non methane total hydrocarbon concentrations in gas samples.
9000MNME utilizes flame ionization detector (FID) and catalytic oxidation device. The total hydrocarbon concentration of the sample is obtained through a FID detector, and the catalytic oxidation device catalyzes the combustion of all hydrocarbons except methane to obtain the methane concentration. The total hydrocarbon value minus the methane value is the non methane total hydrocarbon concentration.
9000MNME can provide fast data analysis with good reproducibility of results.
Technical parameters:
| detector | FID |
| oxidation | catalytic oxidation |
|
range |
The minimum detection limit is 0.02 ppm, 0-50 ppm |
| The minimum detection limit is 0.06 ppm, 0- 500 ppm | |
| The minimum detection limit is 0.150 ppm, 0-5000 ppm | |
| Detector temperature | 65 ℃ (normal temperature type) 120 ℃ (high temperature type) |
| Catalytic oxidation furnace temperature | 230 ℃ (normal temperature type) 215 ℃ (high temperature type) |
| Repeatability | +/- 1% |
| drift | +/- 1% /24h |
| response time | <30 seconds to final reading of 90% |
| call the police | Multi level concentration and fault alarm, sound and light alarm, reflected to external instruments controlled by relays |
| sampling | Built in single point mode, ambient temperature type: with built-in sampling pump or without sampling pump (optional), high temperature type: without sampling pump |
| calibration | Room temperature type: automatic calibration or manual calibration (optional) High temperature type: manual calibration |
| Supporting gas | H2: 35 cc/min. Zero gas 175 cc/min. The hydrocarbon content must be less than 1 ppm |
| power | 90 -230 VAC，50/60 Hz，3A |
| Relay output | 5 programmable forms, relay rated at 3 A @ 230 V AC |
| Analog output | 0-20 mA or 4-20 mA output separately (optional addition of 3 analog output boards) |
| Digital output | RS-232， Ethernet |
| size |
48.26 cm wide x 36.20 cm long x 13.34 cm high | weight | <9.07 kg |
| to configure | Desktop or 19 inch rack | Operating temperature | 0 - 40 °C |
| connect | 1/4 inch pipe | ||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-