16T/H roTechnical parameters of reverse osmosis pure water equipment:

1Water inflow:1000L/H

2Inlet water temperature requirement:1-45℃

3．PH：3-10

4Sludge indexSDI<5，

5TurbidityNTU<1

6Residual chlorine<0.1ppm

7Removal rate>97%

8Power supply380V/50HZ-220V/50HZ

9. Conductivity of water production5-10us/cm

10. Process: Pre treatment+ROreverse osmosis membrane

II6T/H roProcess flow of reverse osmosis pure water equipment:

Raw water tank-raw water pump-Stainless steel mechanical filter-Stainless steel activated carbon filter--Stainless steel security filter - Stainless steel high-pressure pump - Stainless steel reverse osmosis system - Stainless steel pure water tank

III6T/H roProcess description of reverse osmosis pure water equipment

1）Raw water tank PEMade of stainless steel or other materials, it overcomes the instability of water supply in the pipeline network, ensures stable and continuous water supply for the entire system, and provides a guarantee for the long-term reliable operation of equipment.

2）The stainless steel material of the raw water pump provides the necessary working pressure for the pre-treatment equipment，Design pressure drop based on pre-processing equipment(Pressure drop of each filtering device0.05Mpa)Ensure that the pressure before the high-pressure pump is not less than0.01Mpa.

2）The mechanical filter is made of stainless steel material, and the filter medium quartz sand is placed in the filter to intercept suspended solids, colloids, microorganisms, organic matter, heavy metals, rust, etc. in the raw water during this process.

3）Activated carbon filter made of stainless steel material, adsorbs residual chlorine and some organic matter in water, removes odors and pigments in water, improves water clarity, and reduces pollutionreverse osmosis membraneThe pollution.

5）Precision filters, also known asSecurity filterMade of stainless steel material, it can intercept impurities of different particle sizes, integrating surface filtration and deep filtration to prevent particles from entering the reverse osmosis equipment and scratching the membrane surface.

6）The high-pressure pump adopts a stainless steel vertical multi-stage high-pressure pump to provide the required water production flow rate and water quality working pressure for the reverse osmosis system.

7）Reverse osmosis device(Water purifier)Adopting the American Hyden EnergyESPA2-8040Or Dow in the United StatesBW30-8040The membrane.

Local functions:ROfilmAutomatic and manual flushing, automatic shutdown of pure water at high water level, automatic startup at low water level, multi-stage pump water shortage protection, protection against pressure loss, undervoltage, overcurrent, short circuit, open circuit, and leakage

water tank(Pure water tank)Stainless steel material, reserve reverse osmosis purified water.

46T/H roCharacteristics of reverse osmosis pure water equipment

1Adopting original imported reverse osmosis technology(RO)Membrane purification device(Aperture of one ten thousandth of a micrometer)Using advanced reverse osmosis technology to prepare pure water.

2Multi stage filtration comprehensively utilizes the effective functions of various filters to remove sediment, suspended solids, colloids, organic matter, heavy metals, soluble solids, bacteria, viruses, heat sources, and other harmful impurities from source water, while retaining only water molecules and dissolved oxygen. The pre-treatment filter material adopts a replaceable method, which can effectively ensure the pre-treatment effect, and is easy to replace. The filter material price is economical, and the operating cost of water production is low.

3Adopting a silent stainless steel high-pressure pump, it has a long service life and reliable operating quality.

4Equipped with high-pressure backwashing function, it can effectively extend the filter materialROMembrane lifespan.

5Automatic control of water production process(Shutdown due to water shortage in raw water, shutdown due to full water in storage tank).

56T/H roPrecautions for reverse osmosis pure water equipment

（1）After the device is transported to the site, it should be placed indoors, and the ambient temperature should not be lower than5℃, when higher than35At ℃, ventilation should be strengthened and should not exceed40℃.

（2）The device should be installed within one month after arrival and immediately undergo a water test run.

（3）Before conducting a water test on the device, no valve should be opened to prevent the protective solution from flowing out and causing damage to the components.

（4）After the device is in place, the support points of the device should be adjusted to ensure that the components are in a basic horizontal position and have reliable contact with the foundation.

（5）The output height of the water output pipe of the device should be greater than8Rice.

（6）If there is no discharge ditch next to the device, the main discharge pipe of the device should be connected to the main discharge ditch.

Related searches:Several main indicators for measuring the performance of reverse osmosis membranes Fault analysis and troubleshooting of reverse osmosis system Nanofiltration, microfiltration, ultrafiltration, reverse osmosis systems